Hi Devin, layer groups at the moment have limited dimension support, in particular, they show up dimensions only when they are in the special "Earth Observation" mode, in which a "browse" layer is set in the root position of the group, and is showed directly when the group is requested, instead of showing the inner layers. This has been done to support the OGC WMS Earth Observation profile. In that case, and if the root layer has dimensions, the group advertises dimensions in the capabiltiies.
There is currently no logic to go over the nested layers and check if by chance they all have the same dimensions, and same dimension values. It could be added of course, maybe controlled as a flag, scanning over an entire tree of layers and compute their dimension values (which could be deep) could prove to be expensive. Or maybe the flag would be there to tell GeoServer to trust everything is aligned, and just pick the first layer dimension values as good for the entire tree. Cheers Andrea On Tue, Sep 6, 2016 at 7:05 PM, Devin Eyre <[email protected]> wrote: > What I have done so far is to make three time-enabled layers (for rain, > snow, and mixed/ice), and made a layer group out of them. How hard would > it be to time-enable a layer group? All three layers have exactly the same > times available. > ------------------------------ > *From:* [email protected] <[email protected]> on behalf of Andrea > Aime <[email protected]> > *Sent:* Thursday, September 1, 2016 11:19 AM > *To:* Simone Giannecchini > *Cc:* Devin Eyre; [email protected] > > *Subject:* Re: [Geoserver-users] Styling a raster based on two bands > > In particular, I believe the quickest approach would be to write your own > rendering transformation (they are pluggable after all). > > There is no dev doc, but you can find some info here: > http://docs.geoserver.org/stable/en/user/styling/sld-extensions/rendering- > transform.html > https://github.com/geotools/geotools/wiki/rendering-transformations > > Cheers > Andrea > > On Thu, Sep 1, 2016 at 6:06 PM, Simone Giannecchini < > [email protected]> wrote: > >> RIght now, >> this needs some coding in GeoServer, alternatively, you can preprocess >> the second band accordingly. >> >> Simone. >> >> On Thursday, September 1, 2016, Devin Eyre <[email protected]> >> wrote: >> >>> We want to use a different colormap for the same radar reflectivity >>> value based on the precipitation type (snow, rain, or mixed). >>> We were hoping we could get away with only making one layer with two >>> different styles, one of which would show precipitation type, and one would >>> not. >>> ________________________________________ >>> From: Simone Giannecchini <[email protected]> >>> Sent: Thursday, September 1, 2016 10:34 AM >>> To: Devin Eyre >>> Cc: Simone Giannecchini; [email protected] >>> Subject: Re: [Geoserver-users] Styling a raster based on two bands >>> >>> Ciao Devin, >>> yeah, ok but if you want to get help you need to give some more info. >>> >>> If you want to be able to style each band separately from the tiff >>> file, you can do it with two different styles doing a channel >>> selection before the colormap. >>> >>> I still don't understand how you want to apply a colormap to a two >>> bands raster, so, please, let me know more. >>> >>> Regards, >>> Simone Giannecchini >>> == >>> GeoServer Professional Services from the experts! >>> Visit http://goo.gl/it488V for more information. >>> == >>> Ing. Simone Giannecchini >>> @simogeo >>> Founder/Director >>> >>> GeoSolutions S.A.S. >>> Via di Montramito 3/A >>> 55054 Massarosa (LU) >>> Italy >>> phone: +39 0584 962313 >>> fax: +39 0584 1660272 >>> mob: +39 333 8128928 >>> >>> http://www.geo-solutions.it >>> http://twitter.com/geosolutions_it >>> >>> ------------------------------------------------------- >>> AVVERTENZE AI SENSI DEL D.Lgs. 196/2003 >>> Le informazioni contenute in questo messaggio di posta elettronica e/o >>> nel/i file/s allegato/i sono da considerarsi strettamente riservate. >>> Il loro utilizzo è consentito esclusivamente al destinatario del >>> messaggio, per le finalità indicate nel messaggio stesso. Qualora >>> riceviate questo messaggio senza esserne il destinatario, Vi preghiamo >>> cortesemente di darcene notizia via e-mail e di procedere alla >>> distruzione del messaggio stesso, cancellandolo dal Vostro sistema. >>> Conservare il messaggio stesso, divulgarlo anche in parte, >>> distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità >>> diverse, costituisce comportamento contrario ai principi dettati dal >>> D.Lgs. 196/2003. >>> >>> The information in this message and/or attachments, is intended solely >>> for the attention and use of the named addressee(s) and may be >>> confidential or proprietary in nature or covered by the provisions of >>> privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New >>> Data Protection Code).Any use not in accord with its purpose, any >>> disclosure, reproduction, copying, distribution, or either >>> dissemination, either whole or partial, is strictly forbidden except >>> previous formal approval of the named addressee(s). If you are not the >>> intended recipient, please contact immediately the sender by >>> telephone, fax or e-mail and delete the information in this message >>> that has been received in error. The sender does not give any warranty >>> or accept liability as the content, accuracy or completeness of sent >>> messages and accepts no responsibility for changes made after they >>> were sent or for other risks which arise as a result of e-mail >>> transmission, viruses, etc. >>> >>> >>> On Thu, Sep 1, 2016 at 5:30 PM, Devin Eyre <[email protected]> >>> wrote: >>> > The first band is radar reflectivity, and the second band is >>> precipitation >>> > type. >>> > >>> > ________________________________ >>> > From: Simone Giannecchini <[email protected]> >>> > Sent: Thursday, September 1, 2016 10:26 AM >>> > To: Devin Eyre >>> > Cc: [email protected] >>> > Subject: Re: [Geoserver-users] Styling a raster based on two bands >>> > >>> > Ciao Devin, >>> > the quick answer is no, however I am curious about what your use case >>> is and >>> > what you are trying to achieve. >>> > I don't see a meaningful use case for creating a single colormap out >>> of two >>> > bands >>> > unless you are talking about doing some kind of raster algebra before >>> > applyin the coloramp (which is 1D by definition). >>> > >>> > Simone. >>> > >>> > On Thursday, September 1, 2016, Devin Eyre <[email protected]> >>> wrote: >>> >> >>> >> Is there a way to set a colorMapEntry based on two different bands of >>> a >>> >> raster? >>> > >>> > >>> > >>> > -- >>> > Regards, >>> > Simone Giannecchini >>> > == >>> > GeoServer Professional Services from the experts! >>> > Visit http://goo.gl/it488V for more information. >>> > == >>> > Ing. Simone Giannecchini >>> > @simogeo >>> > Founder/Director >>> > >>> > GeoSolutions S.A.S. >>> > Via di Montramito 3/A >>> > 55054 Massarosa (LU) >>> > Italy >>> > phone: +39 0584 962313 >>> > fax: +39 0584 1660272 >>> > mob: +39 333 8128928 >>> > >>> > http://www.geo-solutions.it >>> > http://twitter.com/geosolutions_it >>> > >>> > ------------------------------------------------------- >>> > AVVERTENZE AI SENSI DEL D.Lgs. 196/2003 >>> > Le informazioni contenute in questo messaggio di posta elettronica e/o >>> nel/i >>> > file/s allegato/i sono da considerarsi strettamente riservate. Il loro >>> > utilizzo è consentito esclusivamente al destinatario del messaggio, >>> per le >>> > finalità indicate nel messaggio stesso. Qualora riceviate questo >>> messaggio >>> > senza esserne il destinatario, Vi preghiamo cortesemente di darcene >>> notizia >>> > via e-mail e di procedere alla distruzione del messaggio stesso, >>> > cancellandolo dal Vostro sistema. Conservare il messaggio stesso, >>> divulgarlo >>> > anche in parte, distribuirlo ad altri soggetti, copiarlo, od >>> utilizzarlo per >>> > finalità diverse, costituisce comportamento contrario ai principi >>> dettati >>> > dal D.Lgs. 196/2003. >>> > >>> > The information in this message and/or attachments, is intended solely >>> for >>> > the attention and use of the named addressee(s) and may be >>> confidential or >>> > proprietary in nature or covered by the provisions of privacy act >>> > (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection >>> > Code).Any use not in accord with its purpose, any disclosure, >>> reproduction, >>> > copying, distribution, or either dissemination, either whole or >>> partial, is >>> > strictly forbidden except previous formal approval of the named >>> > addressee(s). If you are not the intended recipient, please contact >>> > immediately the sender by telephone, fax or e-mail and delete the >>> > information in this message that has been received in error. The >>> sender does >>> > not give any warranty or accept liability as the content, accuracy or >>> > completeness of sent messages and accepts no responsibility for >>> changes >>> > made after they were sent or for other risks which arise as a result of >>> > e-mail transmission, viruses, etc. >>> >> >> >> -- >> Regards, >> Simone Giannecchini >> == >> GeoServer Professional Services from the experts! >> Visit http://goo.gl/it488V for more information. >> == >> Ing. Simone Giannecchini >> @simogeo >> Founder/Director >> >> GeoSolutions S.A.S. >> Via di Montramito 3/A >> 55054 Massarosa (LU) >> Italy >> phone: +39 0584 962313 >> fax: +39 0584 1660272 >> mob: +39 333 8128928 >> >> http://www.geo-solutions.it >> http://twitter.com/geosolutions_it >> >> ------------------------------------------------------- >> AVVERTENZE AI SENSI DEL D.Lgs. 196/2003 >> Le informazioni contenute in questo messaggio di posta elettronica e/o >> nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il >> loro utilizzo è consentito esclusivamente al destinatario del messaggio, >> per le finalità indicate nel messaggio stesso. Qualora riceviate questo >> messaggio senza esserne il destinatario, Vi preghiamo cortesemente di >> darcene notizia via e-mail e di procedere alla distruzione del messaggio >> stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, >> divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od >> utilizzarlo per finalità diverse, costituisce comportamento contrario ai >> principi dettati dal D.Lgs. 196/2003. >> >> The information in this message and/or attachments, is intended solely >> for the attention and use of the named addressee(s) and may be confidential >> or proprietary in nature or covered by the provisions of privacy act >> (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection >> Code).Any use not in accord with its purpose, any disclosure, reproduction, >> copying, distribution, or either dissemination, either whole or partial, is >> strictly forbidden except previous formal approval of the named >> addressee(s). If you are not the intended recipient, please contact >> immediately the sender by telephone, fax or e-mail and delete the >> information in this message that has been received in error. The sender >> does not give any warranty or accept liability as the content, accuracy or >> completeness of sent messages and accepts no responsibility for changes >> made after they were sent or for other risks which arise as a result of >> e-mail transmission, viruses, etc. >> >> ------------------------------------------------------------ >> ------------------ >> >> _______________________________________________ >> Geoserver-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/geoserver-users >> >> > > > -- > == > GeoServer Professional Services from the experts! Visit > http://goo.gl/it488V for more information. > == > > Ing. Andrea Aime > @geowolf > Technical Lead > > GeoSolutions S.A.S. > Via di Montramito 3/A > 55054 Massarosa (LU) > phone: +39 0584 962313 > fax: +39 0584 1660272 > mob: +39 339 8844549 > > http://www.geo-solutions.it > http://twitter.com/geosolutions_it > > *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* > > Le informazioni contenute in questo messaggio di posta elettronica e/o > nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il > loro utilizzo è consentito esclusivamente al destinatario del messaggio, > per le finalità indicate nel messaggio stesso. Qualora riceviate questo > messaggio senza esserne il destinatario, Vi preghiamo cortesemente di > darcene notizia via e-mail e di procedere alla distruzione del messaggio > stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, > divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od > utilizzarlo per finalità diverse, costituisce comportamento contrario ai > principi dettati dal D.Lgs. 196/2003. > > > > The information in this message and/or attachments, is intended solely for > the attention and use of the named addressee(s) and may be confidential or > proprietary in nature or covered by the provisions of privacy act > (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection > Code).Any use not in accord with its purpose, any disclosure, reproduction, > copying, distribution, or either dissemination, either whole or partial, is > strictly forbidden except previous formal approval of the named > addressee(s). If you are not the intended recipient, please contact > immediately the sender by telephone, fax or e-mail and delete the > information in this message that has been received in error. The sender > does not give any warranty or accept liability as the content, accuracy or > completeness of sent messages and accepts no responsibility for changes > made after they were sent or for other risks which arise as a result of > e-mail transmission, viruses, etc. > > ------------------------------------------------------- > -- == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Andrea Aime @geowolf Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 339 8844549 http://www.geo-solutions.it http://twitter.com/geosolutions_it *AVVERTENZE AI SENSI DEL D.Lgs. 196/2003* Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i file/s allegato/i sono da considerarsi strettamente riservate. Il loro utilizzo è consentito esclusivamente al destinatario del messaggio, per le finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia via e-mail e di procedere alla distruzione del messaggio stesso, cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per finalità diverse, costituisce comportamento contrario ai principi dettati dal D.Lgs. 196/2003. The information in this message and/or attachments, is intended solely for the attention and use of the named addressee(s) and may be confidential or proprietary in nature or covered by the provisions of privacy act (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection Code).Any use not in accord with its purpose, any disclosure, reproduction, copying, distribution, or either dissemination, either whole or partial, is strictly forbidden except previous formal approval of the named addressee(s). If you are not the intended recipient, please contact immediately the sender by telephone, fax or e-mail and delete the information in this message that has been received in error. The sender does not give any warranty or accept liability as the content, accuracy or completeness of sent messages and accepts no responsibility for changes made after they were sent or for other risks which arise as a result of e-mail transmission, viruses, etc. -------------------------------------------------------
------------------------------------------------------------------------------
_______________________________________________ Geoserver-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/geoserver-users
