I’ve gone back through this and read it again to try to familiarize myself with
the situation.
Is there a reason why GeoServer currently does it in the order it does it? For
instance, if I were to make the alternative — would it open up additional
issues that were prevented it from doing it how GeoServer currently does it?
Also, if you would be able to, can you point to where it’s located in the code?
Thanks,
Tyler Youschak
On Fri, Aug 31, 2018 at 12:14 AM Andrea Aime < Andrea Aime ( Andrea Aime
<andrea.a...@geo-solutions.it> ) > wrote:
>
>
> On Mon, Aug 27, 2018 at 6:47 PM Tyler Youschak < tyleryousc...@gmail.com >
> wrote:
>
>
>> For the layer thats been acting up, I went ahead and turned off bilinear
>> interpolation, and switched it back to nearest neighbor. This did fix my
>> issue, but lost all of the nice smoothing, which is not ideal.
>>
>>
>> Is there a way to “fix” this for bilinear situations?
>>
>>
>> Nearest Neighbor:
>> https://drive.google.com/open?id=1gXNdGQ8_1pDA4ovZ7vhrb3i5H8A8tguY
>> (
>> https://share.polymail.io/v1/z/b/NWI4NDE5ZGFmYTdi/4CTsD9mjQzZdJe9BgvUYuORmavUuUGPEojb1yBKm7sDmY3TpnV8rH6EHkxdtK7UjDszTbP4qoDRJw9rjCw1K2VZplx_E48Klviq2M7w7eFiwl9bXCwUVUlPxVGn8tf8Q1FW2IEBjlJGJlHYyYg6F0omncaizSu7I4vtK0aBQgprvrUirnkqQbV5kViJFF8w8wI5mDKCvnZD2a30cwCSnhJ0g15Am7fVxV5yw7AbVfsEcGQbwTOG7bgF5COzHZQLd5LvZ
>> )
>>
>> Bilinear: https://drive.google.com/open?id=1idQOhiHbv0IkmVnAX2dycZi9UqyWyWuR
>> (
>> https://share.polymail.io/v1/z/b/NWI4NDE5ZGFmYTdi/4CTsD9mjQzZdJe9BgvUYuORmavUuUGPEojb1yBKm7sDmY3TpnV8rH6EHkxdtK7UjDszTbP4qoDRJw9rjCw1K2VZplx_E48Klviq2M7w7eFiwl9bXCwUVUlPxVGn8tf8Q1FW2IEBjlJGJlHYyYg6F0omncaizSu7I4vtK0aBQgprvrUirnkqQbV5kViJFF8w8wI5mApywtr_OG0BbgCmN3aQ4zP9i4f5wPpy88U_tEcwsGQ2NnowybFdgbTFzIEEEPeby
>> ) (it also looks this way for bicubic)
>>
>>
>>
>>
>
>
>
> Unsure... rescaling with bilinear interpolation happens before the palette
> is applied, so it other
> values that were not there in the original map, and then they get colored.
>
>
>
> I did not translate the colormap back to human visible colors, but I'm
> guessing green is on one end
> of the colormap, and the blue is on the other end, right?
>
>
> There is currently no way to apply the palette first, and then do the
> rescaling (and eventual
> reprojection) of image with interpolation. Doing that would allow the
> interpolation to just blend between
> green and blue, without going throught the other colors in the palette.
> It could certainly be added, but it's not a quick change. If you can
> develop in Java and know about image
> processing I can point you to the location in the code where the
> processing is done.
> Or, if you are in a position to sponsor development, you can check out the
> commercial support page and
> inquire companies about implementing the change for you:
> http://geoserver.org/support/
>
>
>
> Cheers
> Andrea
>
>
> ==
>
>
GeoServer Professional Services from the experts! Visit http://goo.gl/it488V
for more information. == Ing. Andrea Aime @geowolf Technical Lead GeoSolutions
S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) phone: +39 0584 962313 fax:
+39 0584 1660272 mob: +39 339 8844549 http://www.geo-solutions.it
http://twitter.com/geosolutions_it
------------------------------------------------------- Con riferimento alla
normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento
generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza
inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) è
un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati dallo
scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a cancellarlo,
ogni altra operazione è illecita. Le sarei comunque grato se potesse darmene
notizia. This email is intended only for the person or entity to which it is
addressed and may contain information that is privileged, confidential or
otherwise protected from disclosure. We remind that - as provided by European
Regulation 2016/679 “GDPR” - copying, dissemination or use of this e-mail or
the information herein by anyone other than the intended recipient is
prohibited. If you have received this email by mistake, please notify us
immediately by telephone or e-mail.
_______________________________________________
Geoserver-users mailing list
Please make sure you read the following two resources before posting to this
list:
- Earning your support instead of buying it, but Ian Turton:
http://www.ianturton.com/talks/foss4g.html#/
- The GeoServer user list posting guidelines:
http://geoserver.org/comm/userlist-guidelines.html
If you want to request a feature or an improvement, also see this:
https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer
Geoserver-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-users