Hi Tom! I just did this in a similar environment. But I am running Geoserver as a web-app under Tomcat. Which made the installation very simple. However, the settings need to be applied to the Java settings, and I did not touch any Geoserver or Tomcat bat files. That did not work. Also, the PATH setting and Gdal variables needed to be set in the machine system variables. I can be more specific if the Tomcat web-app configuration applies to you.
Hälsning / Regards Mats.E Skickat från min / Sent from my iPad, Ursäkta att jag är kortfattad / Excuse my brevity. > 16 okt. 2019 kl. 06:33 skrev Tom Lynch <t...@trailmarker.io>: > > Hi Daniele, > > Thanks a lot for your response - really appreciate any help you are able to > offer. > > My reply is slightly delayed because I wanted to get the details of the > server I'm configuring correct. However, I think my main issue is just with > getting a GDAL 2.x based extension to load within GeoServer 2.16.0 on Windows > x64. > > I'm setting up on WIndows Server 2012 R2 Standard using the > platform-independent binary. I've downloaded and set up the 2.16.0 release > without issues, base install runs fine. > > I also downloaded the geoserver-2.16.0-gdal-plugin.zip archive from the > Extensions area and copied the jars into my GeoServer's /lib area as > instructed. > > To install the Windows native dependencies, I followed the instructions here > https://docs.geoserver.org/stable/en/user/data/raster/gdal.html under > "Windows packages and setup": > > I downloaded the following archive from GISInternals: > > release-1900-x64-gdal-2-4-2-mapserver-7-4-0.zip > > and extracted it to C:\gisinternals > > Then added the following lines to startup.bat in the GeoServer bin area: > > set PATH=%PATH%;C:\gisinternals\bin;C:\gisinternals\bin\gdal\java > set GDAL_DRIVER_PATH=C:\gisinternals\bin\gdal\plugins > set GDAL_DATA=C:\gisinternals\bin\gdal-data > > The main GDAL DLL in this extracted ZIP is gdal204.dll ... is this as > expected? > > (I realise there are some additional paths I need to add for the ECW plug-in > etc, but not worried about that for now. I've previously verified this GDAL > can read ECW files correctly via gdalinfo and the plug-in on this server.) > > Anyway, when I start GeoServer again after these changes, I don't see the > additional Raster Formats available as Data Sources. I've attached the log of > startup, which doesn't seem to mention loading GDAL as expected. > > Some tips on whether I've got the right GISInternals ZIP, whether my PATH > looks right, perhaps what logging diagnostics I should expect to see as the > GDAL extension is loaded would be really helpful! > > Tom > > >> On Mon, Oct 14, 2019 at 5:08 PM Daniele Romagnoli >> <daniele.romagn...@geo-solutions.it> wrote: >> Hi Tom, >> I didn't get if you are having problems with GDAL registering in general or >> if you only have problem in ECW loading. >> I have a couple of questions to better identify the problem. >> Are you at least seeing the "standard" GDAL drivers from the coverage stores >> in the GUI (as an instance DTED,NITF) and you are missing the ECW ones only? >> https://docs.geoserver.org/stable/en/user/_images/newsource.png >> >> Or are you not seeing any GDAL driver in the stores list, instead, and you >> are getting some log messages reported that GDAL isn't loaded properly? >> >> Please, let us know. >> Best Regards, >> Daniele >> >> >>> On Mon, Oct 14, 2019 at 7:20 AM Tom Lynch <t...@trailmarker.io> wrote: >>> Hi all, >>> >>> Scratching my head slightly about this one after a few hours attempting to >>> get GDAL 2.x / ImageIO-Ext set up with GeoServer 2.16.0. >>> >>> https://docs.geoserver.org/stable/en/user/data/raster/gdal.html >>> >>> Following the instructions above I can see I need GDAL 2.x. I've obtained >>> what I think should be a compatible GISInternals download and unzipped it >>> on the target x64 Windows Server >>> >>> The good news is that I've installed and licensed the ECW JPEG 2000 SDK >>> 5.4, and I can now read ECW files correctly on the server via GDAL 2.x. >>> >>> Unfortunately, the GDAL / ImageIO-Ext extension for GeoServer 2.16.0 is not >>> registering correctly when the webapp initialises - my additional raster >>> formats don't appear in the Data Sources page. >>> >>> >>> Does anyone out there have this configuration, or a similar one set up? >>> GeoServer 2.16.x + GDAL 2.x + ECW SDK 5.4 on 64-bit Windows? >>> >>> Thanks in advance, >>> >>> Tom Lynch >>> _______________________________________________ >>> Geoserver-users mailing list >>> >>> Please make sure you read the following two resources before posting to >>> this list: >>> - Earning your support instead of buying it, but Ian Turton: >>> http://www.ianturton.com/talks/foss4g.html#/ >>> - The GeoServer user list posting guidelines: >>> http://geoserver.org/comm/userlist-guidelines.html >>> >>> If you want to request a feature or an improvement, also see this: >>> https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer >>> >>> >>> Geoserver-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/geoserver-users >> >> >> -- >> Regards, >> Daniele Romagnoli >> == >> GeoServer Professional Services from the experts! Visit http://goo.gl/it488V >> for more information. >> == >> >> Ing. Daniele Romagnoli >> Senior Software Engineer >> >> GeoSolutions S.A.S. >> Via di Montramito 3/A >> 55054 Massarosa (LU) >> Italy >> phone: +39 0584 962313 >> fax: +39 0584 1660272 >> >> http://www.geo-solutions.it >> http://twitter.com/geosolutions_it >> >> ------------------------------------------------------- >> >> Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE >> 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si >> precisa che ogni circostanza inerente alla presente email (il suo contenuto, >> gli eventuali allegati, etc.) è un dato la cui conoscenza è riservata al/i >> solo/i destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto >> per errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le >> sarei comunque grato se potesse darmene notizia. >> >> This email is intended only for the person or entity to which it is >> addressed and may contain information that is privileged, confidential or >> otherwise protected from disclosure. We remind that - as provided by >> European Regulation 2016/679 “GDPR” - copying, dissemination or use of this >> e-mail or the information herein by anyone other than the intended recipient >> is prohibited. If you have received this email by mistake, please notify us >> immediately by telephone or e-mail. > <startup.log> > _______________________________________________ > Geoserver-users mailing list > > Please make sure you read the following two resources before posting to this > list: > - Earning your support instead of buying it, but Ian Turton: > http://www.ianturton.com/talks/foss4g.html#/ > - The GeoServer user list posting guidelines: > http://geoserver.org/comm/userlist-guidelines.html > > If you want to request a feature or an improvement, also see this: > https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer > > > Geoserver-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geoserver-users
_______________________________________________ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html If you want to request a feature or an improvement, also see this: https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
