Hi Daniele (and Mats), Thanks for that — you were correct, I'd copied the jars to the wrong /lib folder. I'm now seeing a string of driver initialisation issues, but I'll investigate those further as I've got some information to go on now.
Appreciate the assistance, Tom On Wed, Oct 16, 2019 at 5:12 PM Daniele Romagnoli < daniele.romagn...@geo-solutions.it> wrote: > Hi Tom, > > On Wed, Oct 16, 2019 at 6:44 AM Tom Lynch <t...@trailmarker.io> wrote: > >> Hi Daniele, >> >> Thanks a lot for your response - really appreciate any help you are able >> to offer. >> >> My reply is slightly delayed because I wanted to get the details of the >> server I'm configuring correct. However, I think my main issue is just with >> getting a GDAL 2.x based extension to load within GeoServer 2.16.0 on >> Windows x64. >> >> I'm setting up on WIndows Server 2012 R2 Standard using the >> platform-independent binary. I've downloaded and set up the 2.16.0 release >> without issues, base install runs fine. >> >> I also downloaded the geoserver-2.16.0-gdal-plugin.zip archive from the >> Extensions area and copied the jars into my GeoServer's /lib area as >> instructed. >> >> To install the Windows native dependencies, I followed the instructions >> here https://docs.geoserver.org/stable/en/user/data/raster/gdal.html under >> "Windows packages and setup": >> >> I downloaded the following archive from GISInternals: >> >> release-1900-x64-gdal-2-4-2-mapserver-7-4-0.zip >> >> >> and extracted it to C:\gisinternals >> >> Then added the following lines to startup.bat in the GeoServer bin area: >> >> set PATH=%PATH%;C:\gisinternals\bin;C:\gisinternals\bin\gdal\java >> set GDAL_DRIVER_PATH=C:\gisinternals\bin\gdal\plugins >> set GDAL_DATA=C:\gisinternals\bin\gdal-data >> >> >> The main GDAL DLL in this extracted ZIP is gdal204.dll ... is this as >> expected? >> > That's correct. > > >> >> (I realise there are some additional paths I need to add for the ECW >> plug-in etc, but not worried about that for now. I've previously verified >> this GDAL can read ECW files correctly via gdalinfo and the plug-in on this >> server.) >> >> Anyway, when I start GeoServer again after these changes, I don't see the >> additional Raster Formats available as Data Sources. I've attached the log >> of startup, which doesn't seem to mention loading GDAL as expected. >> > > I just downloaded the platform independent binary, added GDAL libs and > started and I get a log very similar to yours (see attachment) but I also > have a line referring to GDAL not properly installed (in my instance, I > didn't set PATH yet). > > > *ott 16, 2019 9:27:14 AM > it.geosolutions.imageio.gdalframework.GDALUtilities loadGDALAVVERTENZA: > Failed to load the GDAL native libs. This is not a problem unless you need > to use the GDAL plugins: they won't be enabled.* > > Based on that difference, I suspect your GDAL jars haven't been properly > installed. > Reading again your message I see that you said: *" and copied the jars > into my GeoServer's /lib area "* > > Wait, make sure that you copied them into: > C:\Program Files\GeoServer 2.16.0\webapps\geoserver\WEB-INF\lib > > and NOT in > C:\Program Files\GeoServer 2.16.0\lib > > Please, double check that. > Once done and restarted, you should see a LOG referring GDAL loading > status, something like this: > > > *ott 16, 2019 9:39:08 AM > it.geosolutions.imageio.gdalframework.GDALUtilities loadGDALINFORMAZIONI: > GDAL Native Library loaded (version: 2.4.2)* > > Please, let us know. > Regards, > Daniele > > >> Some tips on whether I've got the right GISInternals ZIP, whether my PATH >> looks right, perhaps what logging diagnostics I should expect to see as the >> GDAL extension is loaded would be really helpful! >> >> Tom >> >> >> On Mon, Oct 14, 2019 at 5:08 PM Daniele Romagnoli < >> daniele.romagn...@geo-solutions.it> wrote: >> >>> Hi Tom, >>> I didn't get if you are having problems with GDAL registering in general >>> or if you only have problem in ECW loading. >>> I have a couple of questions to better identify the problem. >>> Are you at least seeing the "standard" GDAL drivers from the coverage >>> stores in the GUI (as an instance DTED,NITF) and you are missing the ECW >>> ones only? >>> https://docs.geoserver.org/stable/en/user/_images/newsource.png >>> >>> Or are you not seeing any GDAL driver in the stores list, instead, and >>> you are getting some log messages reported that GDAL isn't loaded properly? >>> >>> Please, let us know. >>> Best Regards, >>> Daniele >>> >>> >>> On Mon, Oct 14, 2019 at 7:20 AM Tom Lynch <t...@trailmarker.io> wrote: >>> >>>> Hi all, >>>> >>>> Scratching my head slightly about this one after a few hours attempting >>>> to get GDAL 2.x / ImageIO-Ext set up with GeoServer 2.16.0. >>>> >>>> https://docs.geoserver.org/stable/en/user/data/raster/gdal.html >>>> >>>> Following the instructions above I can see I need GDAL 2.x. I've >>>> obtained what I think should be a compatible GISInternals download and >>>> unzipped it on the target x64 Windows Server >>>> >>>> The good news is that I've installed and licensed the ECW JPEG 2000 SDK >>>> 5.4, and I can now read ECW files correctly on the server via GDAL 2.x. >>>> >>>> Unfortunately, the GDAL / ImageIO-Ext extension for GeoServer 2.16.0 is >>>> not registering correctly when the webapp initialises - my additional >>>> raster formats don't appear in the Data Sources page. >>>> >>>> >>>> Does anyone out there have this configuration, or a similar one set up? >>>> GeoServer 2.16.x + GDAL 2.x + ECW SDK 5.4 on 64-bit Windows? >>>> >>>> Thanks in advance, >>>> >>>> Tom Lynch >>>> _______________________________________________ >>>> Geoserver-users mailing list >>>> >>>> Please make sure you read the following two resources before posting to >>>> this list: >>>> - Earning your support instead of buying it, but Ian Turton: >>>> http://www.ianturton.com/talks/foss4g.html#/ >>>> - The GeoServer user list posting guidelines: >>>> http://geoserver.org/comm/userlist-guidelines.html >>>> >>>> If you want to request a feature or an improvement, also see this: >>>> https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer >>>> >>>> >>>> Geoserver-users@lists.sourceforge.net >>>> https://lists.sourceforge.net/lists/listinfo/geoserver-users >>>> >>> >>> >>> -- >>> Regards, >>> Daniele Romagnoli >>> == >>> GeoServer Professional Services from the experts! Visit >>> http://goo.gl/it488V for more information. >>> == >>> >>> Ing. Daniele Romagnoli >>> Senior Software Engineer >>> >>> GeoSolutions S.A.S. >>> Via di Montramito 3/A >>> 55054 Massarosa (LU) >>> Italy >>> phone: +39 0584 962313 >>> fax: +39 0584 1660272 >>> >>> http://www.geo-solutions.it >>> http://twitter.com/geosolutions_it >>> >>> ------------------------------------------------------- >>> >>> Con riferimento alla normativa sul trattamento dei dati personali (Reg. >>> UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si >>> precisa che ogni circostanza inerente alla presente email (il suo >>> contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è >>> riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il >>> messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra >>> operazione è illecita. Le sarei comunque grato se potesse darmene notizia. >>> >>> This email is intended only for the person or entity to which it is >>> addressed and may contain information that is privileged, confidential or >>> otherwise protected from disclosure. We remind that - as provided by >>> European Regulation 2016/679 “GDPR” - copying, dissemination or use of this >>> e-mail or the information herein by anyone other than the intended >>> recipient is prohibited. If you have received this email by mistake, please >>> notify us immediately by telephone or e-mail. >>> >> _______________________________________________ >> Geoserver-users mailing list >> >> Please make sure you read the following two resources before posting to >> this list: >> - Earning your support instead of buying it, but Ian Turton: >> http://www.ianturton.com/talks/foss4g.html#/ >> - The GeoServer user list posting guidelines: >> http://geoserver.org/comm/userlist-guidelines.html >> >> If you want to request a feature or an improvement, also see this: >> https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer >> >> >> Geoserver-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/geoserver-users >> > > > -- > Regards, > Daniele Romagnoli > == > GeoServer Professional Services from the experts! Visit > http://goo.gl/it488V for more information. > == > > Ing. Daniele Romagnoli > Senior Software Engineer > > GeoSolutions S.A.S. > Via di Montramito 3/A > 55054 Massarosa (LU) > Italy > phone: +39 0584 962313 > fax: +39 0584 1660272 > > http://www.geo-solutions.it > http://twitter.com/geosolutions_it > > ------------------------------------------------------- > > Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE > 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si > precisa che ogni circostanza inerente alla presente email (il suo > contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è > riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il > messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra > operazione è illecita. Le sarei comunque grato se potesse darmene notizia. > > This email is intended only for the person or entity to which it is > addressed and may contain information that is privileged, confidential or > otherwise protected from disclosure. We remind that - as provided by > European Regulation 2016/679 “GDPR” - copying, dissemination or use of this > e-mail or the information herein by anyone other than the intended > recipient is prohibited. If you have received this email by mistake, please > notify us immediately by telephone or e-mail. >
_______________________________________________ Geoserver-users mailing list Please make sure you read the following two resources before posting to this list: - Earning your support instead of buying it, but Ian Turton: http://www.ianturton.com/talks/foss4g.html#/ - The GeoServer user list posting guidelines: http://geoserver.org/comm/userlist-guidelines.html If you want to request a feature or an improvement, also see this: https://github.com/geoserver/geoserver/wiki/Successfully-requesting-and-integrating-new-features-and-improvements-in-GeoServer Geoserver-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geoserver-users
