This reverts commit ad0e6233320b004f0d686f6887c803e508607bd2.
--valgrind-parallel was broken from the start: during review I made
the whole valgrind setup code conditional on not being a
--valgrind-parallel worker child. But even the children crucially
need $GIT_VALGRIND to be set; it should therefore have been set
outside the conditional.
The fix would be a two-liner, but since the introduction of the
feature, almost four months have passed without anyone noticing that
it is broken. So this feature is not worth the about hundred lines of
test-lib.sh complexity. Revert it.
Signed-off-by: Thomas Rast <t...@thomasrast.ch>
---
t/test-lib.sh | 106 ++++++++++++----------------------------------------------
1 file changed, 22 insertions(+), 84 deletions(-)
diff --git a/t/test-lib.sh b/t/test-lib.sh
index 0fa7dfd..eaf6759 100644
--- a/t/test-lib.sh
+++ b/t/test-lib.sh
@@ -205,15 +205,6 @@ do
--valgrind-only=*)
valgrind_only=$(expr "z$1" : 'z[^=]*=\(.*\)')
shift ;;
- --valgrind-parallel=*)
- valgrind_parallel=$(expr "z$1" : 'z[^=]*=\(.*\)')
- shift ;;
- --valgrind-only-stride=*)
- valgrind_only_stride=$(expr "z$1" : 'z[^=]*=\(.*\)')
- shift ;;
- --valgrind-only-offset=*)
- valgrind_only_offset=$(expr "z$1" : 'z[^=]*=\(.*\)')
- shift ;;
--tee)
shift ;; # was handled already
--root=*)
@@ -227,7 +218,7 @@ do
esac
done
-if test -n "$valgrind_only" || test -n "$valgrind_only_stride"
+if test -n "$valgrind_only"
then
test -z "$valgrind" && valgrind=memcheck
test -z "$verbose" && verbose_only="$valgrind_only"
@@ -377,9 +368,7 @@ maybe_teardown_verbose () {
last_verbose=t
maybe_setup_verbose () {
test -z "$verbose_only" && return
- if match_pattern_list $test_count $verbose_only ||
- { test -n "$valgrind_only_stride" &&
- expr $test_count "%" $valgrind_only_stride -
$valgrind_only_offset = 0 >/dev/null; }
+ if match_pattern_list $test_count $verbose_only
then
exec 4>&2 3>&1
# Emit a delimiting blank line when going from
@@ -403,7 +392,7 @@ maybe_teardown_valgrind () {
maybe_setup_valgrind () {
test -z "$GIT_VALGRIND" && return
- if test -z "$valgrind_only" && test -z "$valgrind_only_stride"
+ if test -z "$valgrind_only"
then
GIT_VALGRIND_ENABLED=t
return
@@ -412,10 +401,6 @@ maybe_setup_valgrind () {
if match_pattern_list $test_count $valgrind_only
then
GIT_VALGRIND_ENABLED=t
- elif test -n "$valgrind_only_stride" &&
- expr $test_count "%" $valgrind_only_stride -
$valgrind_only_offset = 0 >/dev/null
- then
- GIT_VALGRIND_ENABLED=t
fi
}
@@ -568,9 +553,6 @@ test_done () {
esac
}
-
-# Set up a directory that we can put in PATH which redirects all git
-# calls to 'valgrind git ...'.
if test -n "$valgrind"
then
make_symlink () {
@@ -618,42 +600,33 @@ then
make_symlink "$symlink_target" "$GIT_VALGRIND/bin/$base" || exit
}
- # In the case of --valgrind-parallel, we only need to do the
- # wrapping once, in the main script. The worker children all
- # have $valgrind_only_stride set, so we can skip based on that.
- if test -z "$valgrind_only_stride"
- then
- # override all git executables in TEST_DIRECTORY/..
- GIT_VALGRIND=$TEST_DIRECTORY/valgrind
- mkdir -p "$GIT_VALGRIND"/bin
- for file in $GIT_BUILD_DIR/git* $GIT_BUILD_DIR/test-*
- do
- make_valgrind_symlink $file
- done
- # special-case the mergetools loadables
- make_symlink "$GIT_BUILD_DIR"/mergetools
"$GIT_VALGRIND/bin/mergetools"
- OLDIFS=$IFS
- IFS=:
- for path in $PATH
+ # override all git executables in TEST_DIRECTORY/..
+ GIT_VALGRIND=$TEST_DIRECTORY/valgrind
+ mkdir -p "$GIT_VALGRIND"/bin
+ for file in $GIT_BUILD_DIR/git* $GIT_BUILD_DIR/test-*
+ do
+ make_valgrind_symlink $file
+ done
+ # special-case the mergetools loadables
+ make_symlink "$GIT_BUILD_DIR"/mergetools "$GIT_VALGRIND/bin/mergetools"
+ OLDIFS=$IFS
+ IFS=:
+ for path in $PATH
+ do
+ ls "$path"/git-* 2> /dev/null |
+ while read file
do
- ls "$path"/git-* 2> /dev/null |
- while read file
- do
- make_valgrind_symlink "$file"
- done
+ make_valgrind_symlink "$file"
done
- IFS=$OLDIFS
- fi
+ done
+ IFS=$OLDIFS
PATH=$GIT_VALGRIND/bin:$PATH
GIT_EXEC_PATH=$GIT_VALGRIND/bin
export GIT_VALGRIND
GIT_VALGRIND_MODE="$valgrind"
export GIT_VALGRIND_MODE
GIT_VALGRIND_ENABLED=t
- if test -n "$valgrind_only" || test -n "$valgrind_only_stride"
- then
- GIT_VALGRIND_ENABLED=
- fi
+ test -n "$valgrind_only" && GIT_VALGRIND_ENABLED=
export GIT_VALGRIND_ENABLED
elif test -n "$GIT_TEST_INSTALLED"
then
@@ -730,41 +703,6 @@ then
else
mkdir -p "$TRASH_DIRECTORY"
fi
-
-# Gross hack to spawn N sub-instances of the tests in parallel, and
-# summarize the results. Note that if this is enabled, the script
-# terminates at the end of this 'if' block.
-if test -n "$valgrind_parallel"
-then
- for i in $(test_seq 1 $valgrind_parallel)
- do
- root="$TRASH_DIRECTORY/vgparallel-$i"
- mkdir "$root"
- TEST_OUTPUT_DIRECTORY="$root" \
- ${SHELL_PATH} "$0" \
- --root="$root" --statusprefix="[$i] " \
- --valgrind="$valgrind" \
- --valgrind-only-stride="$valgrind_parallel" \
- --valgrind-only-offset="$i" &
- pids="$pids $!"
- done
- trap "kill $pids" INT TERM HUP
- wait $pids
- trap - INT TERM HUP
- for i in $(test_seq 1 $valgrind_parallel)
- do
- root="$TRASH_DIRECTORY/vgparallel-$i"
- eval "$(cat "$root/test-results/$(basename "$0" .sh)"-*.counts |
- sed 's/^\([a-z][a-z]*\) \([0-9][0-9]*\)/inner_\1=\2/')"
- test_count=$(expr $test_count + $inner_total)
- test_success=$(expr $test_success + $inner_success)
- test_fixed=$(expr $test_fixed + $inner_fixed)
- test_broken=$(expr $test_broken + $inner_broken)
- test_failure=$(expr $test_failure + $inner_failed)
- done
- test_done
-fi
-
# Use -P to resolve symlinks in our working directory so that the cwd
# in subprocesses like git equals our $PWD (for pathname comparisons).
cd -P "$TRASH_DIRECTORY" || exit 1
--
1.8.4.1.810.g312044e
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
