Hey do you need a job? Thats what any good pro in the field would do. Xcept you need some paper and to do some time ( and support the rich schools).
There is an art and science to this stuff, and its when you learn to blend it you get it. Most never do, the new graduates less likely as the new big fad is to overbill insurance, another effort to maintain the powers that be that will blunder, it killed off many a chiropractor as the same type bubble blew up, once insurance compamies catch on they lower the payment and omit submitted charges as the downward spiral travels, the true end of it all. On Sep 4, 8:11 pm, RE <[EMAIL PROTECTED]> wrote: > In an effort to get my lenses thinner I went up from a 60 PD to a 63 > PD on my larger sunglasses with 53 mm and 54 mm lenses. They won't let > you order them for less than a 64 PD, but I left a note there, and > they said they can do 63. It worked well and I don't notice a > difference. Some peoples PD's aren't equally balanced anyway, and a 60 > PD might be a 28 in one eye and a 32 in the other. If mine is equal, > i's only off by 1.5 mm in each eye. I looked every which way out of > the lenses and didn't notice any distortion. I also went down a bit on > my Rx to get them thinner, and they still feel fine. > > On Sep 4, 11:09 am, onlineIDoc <[EMAIL PROTECTED]> wrote: > > > A pd off by 4 on a pair of -4.00 would produce prism. This can be > > calculated using Prentice's formula. You might get some "pulling" of > > the eyes and some distortion. You would also probably get used to > > this, but when you get another pair on pd, they might feel wierd for a > > while. > > > The higher the rx and the more you are off pd and whether the ocs are > > in or out all affect this, some people can tolerate more than others. > > > On Jul 25, 1:37 pm, RE <[EMAIL PROTECTED]> wrote: > > > > You would think that optical training is fairly standard, and that > > > good and accepted practice in making glasses would be the same across > > > the board. I tried to order a 53mm lens frame with a PD of 60 from > > > Zenni, and it wouldn't allow me too telling me my PD was too small for > > > that frame. I just did a test at 39dollarglasses.com and it let me > > > order a 54mm lens frame with my PD of 60. Is Zenni being overly > > > cautious, or is 39dollarglasses not programmed correctly? I think > > > someone else ordered from there and posted here that someone from that > > > site was surprised the site let them order the glasses. Another site > > > also let me order a larger lens size with my PD. > > > > I just called Cohens Optical and they said a 2mm difference in each > > > eye wouldn't make a difference, and that at the most I might get some > > > distortion on the edges. Has anyone had a PD off by as much as 4mm in > > > a -4.0 Rx and been able to see OK? Some eyeglass sites even do an > > > average PD if you don't have your measurement. --~--~---------~--~----~------------~-------~--~----~ Check us out at the oft-updated http://www.glassyeyes.com! You received this message because you are subscribed to the Google Groups "GlassyEyes" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/glassyeyes?hl=en -~----------~----~----~----~------~----~------~--~---
