On 10/05/2020 21:35, Andy Smith via GLLUG wrote:
Hello,
On Sun, May 10, 2020 at 10:03:32PM +0200, Dr. Axel Stammler via GLLUG wrote:
On Sun 2020-05-10 08.53.16, James Courtier-Dutton wrote:
So, I think moving to an "LVM mirror" solution is your best bet for
future extensibility.
I haven't reviewed all the recent replies, but is there any reason why
you can't add the the two new disks of the same size and migrate from
RAID 1 to RAID 10, e.g:
https://blog.voina.org/convert-an-existing-2-disk-raid-1-to-a-4-disk-raid-10/
(though that has LVM on top, shouldn't make a difference in these
circumstances, just a quick search, there's many other references, YMMV)
RAID 10 slightly enhances failure resistance, increases read speeds and
keeps it simple. Although with two old disks, whatever you do, they will
likely fail first.
The only thing I'd emphasise is whatever you do, if you care about the
data you MUST have a backup first! (though in crisis hero mode I have
been known to ignore my own advice, that's only on my OWN data...)
MeJ
--
In accordance with UK Government directives due to the Covid-19
situation, our office is temporarily closed. All staff are working from
home. These arrangements will continue in accordance with UK Government
advice. Please do not send any correspondence or cheques to our office
as these cannot currently be dealt with, seen, or paid in.
All communication will be via phone or email. It is important, both for
most rapid response and in order that all staff can respond, that you
raise all issues via our Support Desk at:
supp...@stabilys.com
If you need help with working from home please contact us using the
above methods.
Stabilys Ltd www.stabilys.com
244 Kilburn Lane
LONDON
W10 4BA
0845 838 5370
--
GLLUG mailing list
GLLUG@mailman.lug.org.uk
https://mailman.lug.org.uk/mailman/listinfo/gllug
