----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Jim, The starter is from B&C Specialty Products, Inc, ( http://bandcspecialty.com ) it replaces existing pull-cable starters. It is an STC'd replacement for the C-75, C-85, C-90 , C-145, O-200, O-240, O-300 and GO-300 engines Like everything in aviation, it ain't cheap, its about $800. Don't quote me, 'cause I'm new at this, but my A&P and the engine shop recommeded this swap. I was facing a major overhaul with lots of metal found in the oil. It was explained to me that the old pull type starter in some ways was contributing to the problem. He said that if they were not just right that when they were engaged that they could wear and deposit metal, this gets into the mag gears, rod bearing,....etc and can cause the kind of problem that lead to my engine needing an overhaul at 1300hrs, and in my case he really thinks this was the culprit. That's all I know about it. I included the link about for B&C's website for more info. Regards, --Mitch Hines N6369V ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, June 19, 2002 2:28 PM Subject: [COUPERS-FLYIN] Mitch ? about push button type starter > ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- > > > Mitch > Would be interested in hearing more about that > STC'D push button type starter? > Jim Palmer > > > In a message dated 6/19/02 9:59:27 AM Pacific Daylight Time, > [EMAIL PROTECTED] writes: > > << It also included a new STC'd push-button type starter. >> > ================================================================== > TO UNSUBSCRIBE go to: http://ercoupers.com/lists.htm > > ================================================================== TO UNSUBSCRIBE go to: http://ercoupers.com/lists.htm
<<attachment: winmail.dat>>
