----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
I just measured one and the extension measures 2 3/4 inches. Paul NC2273H ----- Original Message ----- From: "Kenneth Neill Carnahan" <[EMAIL PROTECTED]> To: "Paul M. Anton" <[EMAIL PROTECTED]> Sent: Tuesday, July 02, 2002 9:45 PM Subject: Re: [COUPERS-FLYIN] Oil Breather Elbow With Extension > Hi Paul,How long is the inside nipel Thanks, Neill > ----- Original Message ----- > From: "Paul M. Anton" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Tuesday, July 02, 2002 6:21 AM > Subject: Re: [COUPERS-FLYIN] Oil Breather Elbow With Extension > > > > ----[Please read http://ercoupers.com/disclaimer.htm before following any > advice in this forum.]---- > > > > > > I have a Word document describing the extended breather in detail. > > It's too large to post. I'll send it to anyone interested. > > Paul > > NC2273H > > > > > > > > > > > > > > If anyone is interested, I have a good digital photo of the breather > elbow > > > with the extension that came out of my C-90-16F. As far as I know, this > > > extension came as original equipment on my engine. I've never had any > > > problems with oil coming out of the breather. Also on the Alon, the > > breather > > > tube goes up hill over the cylinders and then down through the bottom of > > the > > > cowling, so that may help to limit the oil loss also. > > > > > > Good Flying, > > > > > > Wayne DelRossi > > > Alon N5618F > > > > > > ================================================================== > > TO UNSUBSCRIBE go to: http://ercoupers.com/lists.htm > > > > > > > > > > ================================================================== TO UNSUBSCRIBE go to: http://ercoupers.com/lists.htm
<<attachment: winmail.dat>>
