----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Hi Dick; The Univair catalog only lists two part numbers for the pins.
They list either 069-00400, or 069-00200. As I recall, Univair adds two
zeros to the Cleveland part numbers, so the real Cleveland numbers are
most likely 069-004, or 069-002. I just measured the pin (Cleveland calls
them anchor bolts) on their 030-06315 assembly, (listed as 069-00400) and
it was 1 and 1/32nd inch long (measured from the housing to the end).
Overall length was 2 and 5/16 inches.
If the overall length of your pins is approximately 2 inches, it
sounds like this longer pin is exactly what you would need.
Lynn Nelsen
==================================================================
TO UNSUBSCRIBE go to: http://ercoupers.com/lists.htm
<<attachment: winmail.dat>>
