----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
For folks that have been there done that (BTDT) how did you get the top nut off the C85 generator without taking the left mag off? There's some room to get a 1/2" wrench in there but not quite enough to turn the nut it seems (either from the side or the top). I stopped by Sears looking for a special wrench. Either a very thin or one with a "dogleg" in it- not the dogleg that goes perpendicular to the axis of the bolt but one that "bends" in the XY axis (if the bolt is the Z axis) if that makes sense. They didn't seem to have one. Any other advice? I really don't want to pull the mag and have to re-time. Stan _____ Do you Yahoo!? Y! Web Hosting <http://webhosting.yahoo.com/> - Let the expert host your web site ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm
<<attachment: winmail.dat>>
