Hi, I have created a distributed volume on my gluster node. I have attached this volume to a VM on openstack. The size is 1 GB. I have written files close to 1 GB onto the Volume. But when I do a ls inside the brick directory , the volume is present only on one gluster server brick. But it is empty on another server brick. Files are meant to be spread across both the bricks according to distributed volume definition.
On the VM: -------------- # ls -al total 1013417 drwxr-xr-x 3 root root 4096 Jun 1 22:03 . drwxrwxr-x 3 root root 1024 Jun 1 21:24 .. -rw------- 1 root root 31478251520 Jun 1 21:52 file -rw------- 1 root root 157391257600 Jun 1 21:54 file1 -rw------- 1 root root 629565030400 Jun 1 21:55 file2 -rw------- 1 root root 708260659200 Jun 1 21:59 file3 -rw------- 1 root root 6295650304 Jun 1 22:01 file4 -rw------- 1 root root 39333801984 Jun 1 22:01 file5 -rw------- 1 root root 78643200000 Jun 1 22:04 file6 drwx------ 2 root root 16384 Jun 1 21:24 lost+found ---------- # du -sch * 20.0M file 100.0M file1 400.0M file2 454.0M file3 4.0M file4 11.6M file5 0 file6 16.0K lost+found 989.7M total ------------------------ On the gluster server nodes: ----------------------- root@primary:/export/sdd1/brick# ll total 12 drwxr-xr-x 2 root root 4096 Jun 2 04:08 ./ drwxr-xr-x 4 root root 4096 May 27 08:42 ../ root@primary:/export/sdd1/brick# -------------------------- root@secondary:/export/sdd1/brick# ll total 1046536 drwxr-xr-x 2 root root 4096 Jun 2 08:51 ./ drwxr-xr-x 4 root root 4096 May 27 08:43 ../ -rw-rw-rw- 1 108 115 1073741824 Jun 2 09:35 volume-0ec560be-997f-46da-9ec8-e9d6627f2de1 root@secondary:/export/sdd1/brick# --------------------------------- Thanks Kumar -----Original Message----- From: Franco Broi [mailto:[email protected]] Sent: Monday, June 02, 2014 6:35 PM To: Gnan Kumar, Yalla Cc: [email protected] Subject: Re: [Gluster-users] Distributed volumes Just do an ls on the bricks, the paths are the same as the mounted filesystem. On Mon, 2014-06-02 at 12:26 +0000, [email protected] wrote: > Hi All, > > > > I have created a distributed volume of 1 GB , using two bricks from > two different servers. > > I have written 7 files whose sizes are a total of 1 GB. > > How can I check that files are distributed on both the bricks ? > > > > > > Thanks > > Kumar > > > > > ______________________________________________________________________ > > > This message is for the designated recipient only and may contain > privileged, proprietary, or otherwise confidential information. If you > have received it in error, please notify the sender immediately and > delete the original. Any other use of the e-mail by you is prohibited. > Where allowed by local law, electronic communications with Accenture > and its affiliates, including e-mail and instant messaging (including > content), may be scanned by our systems for the purposes of > information security and assessment of internal compliance with > Accenture policy. > ______________________________________________________________________ > ________________ > > www.accenture.com > _______________________________________________ > Gluster-users mailing list > [email protected] > http://supercolony.gluster.org/mailman/listinfo/gluster-users ________________________________ This message is for the designated recipient only and may contain privileged, proprietary, or otherwise confidential information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the e-mail by you is prohibited. Where allowed by local law, electronic communications with Accenture and its affiliates, including e-mail and instant messaging (including content), may be scanned by our systems for the purposes of information security and assessment of internal compliance with Accenture policy. ______________________________________________________________________________________ www.accenture.com _______________________________________________ Gluster-users mailing list [email protected] http://supercolony.gluster.org/mailman/listinfo/gluster-users
