What do gluster vol info and gluster vol status give you? On Tue, 2014-06-03 at 07:21 +0000, [email protected] wrote: > Hi, > > I have created a distributed volume on my gluster node. I have attached > this volume to a VM on openstack. The size is 1 GB. I have written files > close to 1 GB onto the > Volume. But when I do a ls inside the brick directory , the volume is > present only on one gluster server brick. But it is empty on another server > brick. Files are meant to be > spread across both the bricks according to distributed volume definition. > > On the VM: > -------------- > > # ls -al > total 1013417 > drwxr-xr-x 3 root root 4096 Jun 1 22:03 . > drwxrwxr-x 3 root root 1024 Jun 1 21:24 .. > -rw------- 1 root root 31478251520 Jun 1 21:52 file > -rw------- 1 root root 157391257600 Jun 1 21:54 file1 > -rw------- 1 root root 629565030400 Jun 1 21:55 file2 > -rw------- 1 root root 708260659200 Jun 1 21:59 file3 > -rw------- 1 root root 6295650304 Jun 1 22:01 file4 > -rw------- 1 root root 39333801984 Jun 1 22:01 file5 > -rw------- 1 root root 78643200000 Jun 1 22:04 file6 > drwx------ 2 root root 16384 Jun 1 21:24 lost+found > ---------- > # du -sch * > 20.0M file > 100.0M file1 > 400.0M file2 > 454.0M file3 > 4.0M file4 > 11.6M file5 > 0 file6 > 16.0K lost+found > 989.7M total > ------------------------ > > > On the gluster server nodes: > ----------------------- > root@primary:/export/sdd1/brick# ll > total 12 > drwxr-xr-x 2 root root 4096 Jun 2 04:08 ./ > drwxr-xr-x 4 root root 4096 May 27 08:42 ../ > root@primary:/export/sdd1/brick# > -------------------------- > > root@secondary:/export/sdd1/brick# ll > total 1046536 > drwxr-xr-x 2 root root 4096 Jun 2 08:51 ./ > drwxr-xr-x 4 root root 4096 May 27 08:43 ../ > -rw-rw-rw- 1 108 115 1073741824 Jun 2 09:35 > volume-0ec560be-997f-46da-9ec8-e9d6627f2de1 > root@secondary:/export/sdd1/brick# > --------------------------------- > > > Thanks > Kumar > > > > > > > > > -----Original Message----- > From: Franco Broi [mailto:[email protected]] > Sent: Monday, June 02, 2014 6:35 PM > To: Gnan Kumar, Yalla > Cc: [email protected] > Subject: Re: [Gluster-users] Distributed volumes > > Just do an ls on the bricks, the paths are the same as the mounted filesystem. > > On Mon, 2014-06-02 at 12:26 +0000, [email protected] > wrote: > > Hi All, > > > > > > > > I have created a distributed volume of 1 GB , using two bricks from > > two different servers. > > > > I have written 7 files whose sizes are a total of 1 GB. > > > > How can I check that files are distributed on both the bricks ? > > > > > > > > > > > > Thanks > > > > Kumar > > > > > > > > > > ______________________________________________________________________ > > > > > > This message is for the designated recipient only and may contain > > privileged, proprietary, or otherwise confidential information. If you > > have received it in error, please notify the sender immediately and > > delete the original. Any other use of the e-mail by you is prohibited. > > Where allowed by local law, electronic communications with Accenture > > and its affiliates, including e-mail and instant messaging (including > > content), may be scanned by our systems for the purposes of > > information security and assessment of internal compliance with > > Accenture policy. > > ______________________________________________________________________ > > ________________ > > > > www.accenture.com > > _______________________________________________ > > Gluster-users mailing list > > [email protected] > > http://supercolony.gluster.org/mailman/listinfo/gluster-users > > > > > ________________________________ > > This message is for the designated recipient only and may contain privileged, > proprietary, or otherwise confidential information. If you have received it > in error, please notify the sender immediately and delete the original. Any > other use of the e-mail by you is prohibited. Where allowed by local law, > electronic communications with Accenture and its affiliates, including e-mail > and instant messaging (including content), may be scanned by our systems for > the purposes of information security and assessment of internal compliance > with Accenture policy. > ______________________________________________________________________________________ > > www.accenture.com
_______________________________________________ Gluster-users mailing list [email protected] http://supercolony.gluster.org/mailman/listinfo/gluster-users
