I haven't used AMI (but may be soon if a project is funded), but from what I see online it looks like you should be good to go with the RHEL build.  If the GMAT R2017a RHEL build was working for you on the AMI platform, I'd expect the R2018a build to work as well.

If you haven't run R2017a there, be aware that when I say "it should work" I'm making a couple of assumptions:

 * AMI uses the same GCC libraries as RHEL.  If GCC is installed, you
   can check in a terminal by typing gcc --version.  The R2018a Red Hat
   build uses gcc 4.8.5.  You may have problems with an earlier version
   of GCC.  You're less likely to have issues if the version is higher,
   but there is a chance.
 * You are running the console version of GMAT, rather than the GUI
   version.  I'd expect both to work, but there are fewer library
   dependencies with the console version.

Worse case, GMAT is pretty straightforward to build on Linux, so if the prebuilt version doesn't work work for you, I can help get a local build made for you.

- Darrel


On 4/19/19 8:29 AM, Cooley, D S. (GSFC-5950) wrote:

Hi Darrel,

I thought you might be the best person to answer this.

I also copy the team.

Thanks,

steve

*From:*Dehart, Russell (GSFC-444.0)[KBRwyle] <[email protected]>
*Sent:* Friday, April 19, 2019 11:26 AM
*To:* Jim, Ryan Alan. (GSFC-444.0)[KBRwyle] <[email protected]>; Cooley, D S. (GSFC-5950) <[email protected]>; Hughes, Steven P. (GSFC-5950) <[email protected]>
*Subject:* Re: Help with obtaining/installing new GMAT version

Steve,

I see one of the precompiled Linux versions was built and tested with Red Hat Enterprise Linux 7.2, whereas we use Linux AMI release 2018.03 (which sounds like it has changed enough from its RH ancestry that it's considered it's own distro).  Does anyone on your team have any insight into what problems, if any, we could encounter installing R2018a on this type of system?

Thanks,

Russ

---------------------------------------
Russell DeHart
Technical Adviser--Systems Engineering
GSFC Space Sciences Mission Operations Project
301-286-2771
Bldg. 3, Room 228

------------------------------------------------------------------------

*From:*Jim, Ryan Alan. (GSFC-444.0)[KBRwyle]
*Sent:* Thursday, April 18, 2019 11:22 AM
*To:* Dehart, Russell (GSFC-444.0)[KBRwyle]; Cooley, D S. (GSFC-5950); Hughes, Steven P. (GSFC-5950)
*Subject:* RE: Help with obtaining/installing new GMAT version

We are running neither.  We’re running off of AWS using Amazon Linux AMI release 2018.03 which I believe has roots in RHEL/CentOS.

*From:*Dehart, Russell (GSFC-444.0)[KBRwyle] <[email protected] <mailto:[email protected]>>
*Sent:* Thursday, April 18, 2019 11:14 AM
*To:* Cooley, D S. (GSFC-5950) <[email protected] <mailto:[email protected]>>; Hughes, Steven P. (GSFC-5950) <[email protected] <mailto:[email protected]>> *Cc:* Jim, Ryan Alan. (GSFC-444.0)[KBRwyle] <[email protected] <mailto:[email protected]>>
*Subject:* Re: Help with obtaining/installing new GMAT version

I'll let the smart guy (Ryan) answer those. 🙂

---------------------------------------
Russell DeHart
Technical Adviser--Systems Engineering
GSFC Space Sciences Mission Operations Project
301-286-2771
Bldg. 3, Room 228

------------------------------------------------------------------------

*From:*Cooley, D S. (GSFC-5950)
*Sent:* Thursday, April 18, 2019 11:08 AM
*To:* Dehart, Russell (GSFC-444.0)[KBRwyle]; Hughes, Steven P. (GSFC-5950)
*Cc:* Jim, Ryan Alan. (GSFC-444.0)[KBRwyle]
*Subject:* RE: Help with obtaining/installing new GMAT version

Thanks Russ.  That explains it.

What flavor of linux do you use?  Red Hat or Ubuntu?

What version number?

*From:*Dehart, Russell (GSFC-444.0)[KBRwyle] <[email protected] <mailto:[email protected]>>
*Sent:* Thursday, April 18, 2019 10:49 AM
*To:* Cooley, D S. (GSFC-5950) <[email protected] <mailto:[email protected]>>; Hughes, Steven P. (GSFC-5950) <[email protected] <mailto:[email protected]>> *Cc:* Jim, Ryan Alan. (GSFC-444.0)[KBRwyle] <[email protected] <mailto:[email protected]>>
*Subject:* Re: Help with obtaining/installing new GMAT version

Ryan,

Would you be able to check what Steve mentioned?

Steve,

I think you're thinking of Fermi.  Fermi will be using the Windows version.  On the NaaS orbit side, we use the Linux version.  On the NaaS maneuver side, we do use the Windows version, though.

Russ

---------------------------------------
Russell DeHart
Technical Adviser--Systems Engineering
GSFC Space Sciences Mission Operations Project
301-286-2771
Bldg. 3, Room 228

------------------------------------------------------------------------

*From:*Cooley, D S. (GSFC-5950)
*Sent:* Thursday, April 18, 2019 10:40 AM
*To:* Dehart, Russell (GSFC-444.0)[KBRwyle]; Hughes, Steven P. (GSFC-5950)
*Cc:* Jim, Ryan Alan. (GSFC-444.0)[KBRwyle]
*Subject:* RE: Help with obtaining/installing new GMAT version

Russ,

I thought someone said that you all use the Windows version.  Did I hear that wrong?

To determine which version you had, take a look at the following equivalent directory:

Do you have a “proprietary” folder?  If so, do you have these plugins?

*From:*Dehart, Russell (GSFC-444.0)[KBRwyle] <[email protected] <mailto:[email protected]>>
*Sent:* Thursday, April 18, 2019 10:34 AM
*To:* Cooley, D S. (GSFC-5950) <[email protected] <mailto:[email protected]>>; Hughes, Steven P. (GSFC-5950) <[email protected] <mailto:[email protected]>> *Cc:* Jim, Ryan Alan. (GSFC-444.0)[KBRwyle] <[email protected] <mailto:[email protected]>>
*Subject:* RE: Help with obtaining/installing new GMAT version

Steve,

Currently we use the Linux version of GMAT 2017a.  I don’t know if that’s “internal” or “public”.  Were there two versions for 2017a?  If so, how would we be able to tell which we use?

Thanks,

Russ

------------------------------------------

Russell DeHart

Technical Advisor—Systems Engineering

SSMO Systems Engineering

KBRwyle

Office: (301) 286-2771

Cell: (410) 300-5058

*From:*Cooley, D S. (GSFC-5950)
*Sent:* Wednesday, April 17, 2019 7:11 PM
*To:* Dehart, Russell (GSFC-444.0)[KBRwyle] <[email protected] <mailto:[email protected]>>; Hughes, Steven P. (GSFC-5950) <[email protected] <mailto:[email protected]>> *Cc:* Jim, Ryan Alan. (GSFC-444.0)[KBRwyle] <[email protected] <mailto:[email protected]>>
*Subject:* RE: Help with obtaining/installing new GMAT version

Hi All,

Is the version you have now “internal” or “public?”

I think it makes sense to use R2018A. If you grab the internal version, you can’t distribute it further as it contains some proprietary plug-ins.   (Steve S, do you all use internal or public versions?)

In any event, the builds are located here:

\\mesa-file\595\GMAT\Releases\R2018a <file://mesa-file/595/GMAT/Releases/R2018a>

Go to “internal” or “public” folder as deemed appropriate.

The windows build is labelled “win.”

Thanks,

Steve

*From:*Dehart, Russell (GSFC-444.0)[KBRwyle] <[email protected] <mailto:[email protected]>>
*Sent:* Wednesday, April 17, 2019 2:27 PM
*To:* Cooley, D S. (GSFC-5950) <[email protected] <mailto:[email protected]>>; Hughes, Steven P. (GSFC-5950) <[email protected] <mailto:[email protected]>> *Cc:* Jim, Ryan Alan. (GSFC-444.0)[KBRwyle] <[email protected] <mailto:[email protected]>>
*Subject:* Help with obtaining/installing new GMAT version

Hi Steve & Steve,

I know you're both out of the office right now.  But when you return, can you help one of our developers, Ryan (cc'd), obtain and install a new version of GMAT?  We plan to upgrade our version of GMAT as part of the NaaS release we're working on.  I had planned to have us upgrade to R2018a, but if you think I should consider a newer build for ACE & Wind, let me know.  You could change my mind.

Thanks,

Russ

---------------------------------------
Russell DeHart
Technical Adviser--Systems Engineering
GSFC Space Sciences Mission Operations Project
301-286-2771
Bldg. 3, Room 228


--
Darrel J. Conway, Ph.D.      Thinking Systems, Inc.
Senior Scientist and CEO     437 W Thurber Road, Suite 6
Phone: (623) 298-4530        Tucson, AZ 85705
FAX:   (520) 232-2533        www.thinksysinc.com
Cell:  (520) 425-3626        [email protected]

_______________________________________________
Gmat-buildtest mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/gmat-buildtest

Reply via email to