Roland Tollenaar a écrit : > Hi Jean-Francois, > >> I see no problem here to generate 2nd order elements. Yet, I cannot see > Are you telling me that you cannot repeat the crashing?! Are you also > using version 2.2.5? I attached my settings because with me the > meshing operation crashes. >
Yes, I cannot, I used gmsh ~/Desktop/ASSEMBLY\ CASSETE_04.STEP -clscale .3 -degree 2 -2 and the mesh was created without crashing. The Netgen Optimized optimizes tetrahedral meshes. >> how you can apply netgen optimizer on your >> structure : it is only composed of surfaces. > This is simple to explain. I am not well versed on the internal > operation of the netgen optimizer:). May I ask when it does make sense > to use the optimizer? > > Regards, > > Roland > > > > >> >> Jean-François. >> >> >>> Can someone comment on this? Attached is the model. >>> >>> Kind regards, >>> >>> Roland >>> >>> >>> Ruth V. Sabariego wrote: >>>> Your model seems to have only lines and points, that's why you >>>> don't see a 2D/3D mesh. >>>> The 1D mesh is done correctly. >>>> >>>> Ruth >>>> >>>> Roland Tollenaar wrote: >>>>> Hello, >>>>> >>>>> I have a model which fails to mesh. gmsh says its meshing it >>>>> (console) but nothing happens. (0s) >>>>> >>>>> I have seen this same behaviour with STL models previously and >>>>> simply assumed that gmsh could not handle stl files. >>>>> >>>>> However this is a step model of a type that gmsh previously did >>>>> mesh well. >>>>> >>>>> I have attached the model. >>>>> >>>>> Kind regards, >>>>> >>>>> Roland >>>>> ------------------------------------------------------------------------ >>>>> >>>>> >>>>> _______________________________________________ >>>>> gmsh mailing list >>>>> [email protected] >>>>> http://www.geuz.org/mailman/listinfo/gmsh >>>> >>>> -- >>>> Dr. Ir. Ruth V. Sabariego >>>> University of Liege, Institut Montefiore, >>>> Dept. of Electrical Engineering & Computer Science, Applied & >>>> Computational Electromagnetics (ACE), >>>> Sart Tilman Campus, Grande Traverse, 10 (B28), B-4000 LIEGE, Belgium >>>> phone: +32-4-3663737 -- fax: +32-4-3662910 -- >>>> http://elap.montefiore.ulg.ac.be/ >>>> >>> ------------------------------------------------------------------------ >>> >>> >>> _______________________________________________ >>> gmsh mailing list >>> [email protected] >>> http://www.geuz.org/mailman/listinfo/gmsh >> >> > > ------------------------------------------------------------------------ > > > ------------------------------------------------------------------------ > -- Prof. Jean-Francois Remacle Universite catholique de Louvain (UCL) Tel : +32-10-472082 -- Mobile : +32-473-909930 _______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
