Hi Gmsh users; Just to let those know who'd like to compile Gmsh 2.3.0 with OpenCascade support on ubuntu 8.10, the instructions in README.occ is correct except that the following didn't work for me, maybe understood incorrectly (copied from README.occ):
and copy config.h and the <OpenCascade dir>/ros/inc/ subdirectory to /usr/local/opencascade (This is the same as a doing a partial 'make install') Perhaps (?) it should be and copy the <OpenCascade dir>/ros/inc subdirectory to /usr/local/opencascade/ Then copy config.h to /usr/local/opencascade/inc/ Anyway, the above worked for me. You should therefore only have bin, inc and lib directories in usr/local/opencascade, with config.h in ...cascade/inc -- Before you compile Gmsh, do $ sudo apt-get build-dep gmsh and then follow the rest of the instructions in README.occ Compiling from source will also get rid of the ugly fonts under Ubuntu if you use the downloaded binary. Cheers, William _______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
