William Hunter wrote: > Hi Gmsh users; > > Just to let those know who'd like to compile Gmsh 2.3.0 with > OpenCascade support on ubuntu 8.10, the instructions in README.occ is > correct except that the following didn't work for me, maybe understood > incorrectly (copied from README.occ): > > and copy config.h and the <OpenCascade dir>/ros/inc/ subdirectory > to /usr/local/opencascade (This is the same as a doing a partial > 'make install') > > Perhaps (?) it should be > > and copy the <OpenCascade dir>/ros/inc subdirectory > to /usr/local/opencascade/ Then copy config.h to > /usr/local/opencascade/inc/ > > Anyway, the above worked for me. You should therefore only have > bin, inc and lib > directories in usr/local/opencascade, with config.h in ...cascade/inc >
Hi William - Indeed we never know how Open Cascade is supposed to be installed... Is the opencascade opencascade/bin opencascade/inc opencascade/lib hierarchy the official one? > -- > > Before you compile Gmsh, do > > $ sudo apt-get build-dep gmsh > > and then follow the rest of the instructions in README.occ Compiling > from source will also get rid of the ugly fonts under Ubuntu if you > use the downloaded binary. > > Cheers, > William > > _______________________________________________ > gmsh mailing list > [email protected] > http://www.geuz.org/mailman/listinfo/gmsh > > -- Prof. Christophe Geuzaine University of Liege, Electrical Engineering and Computer Science http://www.montefiore.ulg.ac.be/~geuzaine _______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
