I frequently have the problem of dealing with overlapping faces, so I would be interested to use this feature if it was integrated in gmsh.
Thank you, Matthias > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of Christophe Geuzaine > Sent: Thursday, April 16, 2009 1:45 PM > To: Mark van Doesburg > Cc: [email protected] > Subject: Re: [Gmsh] Connecting faces. > > Mark van Doesburg wrote: > > Hello, > > > > Some time ago I reported that I was working on a method to connect > > overlapping faces in OpenCASCADE models. At that time > expected it to > > be two weeks of work. Unfortunately OpenCASCADE is not as > capable as > > it appeared at that time, in fact I have yet to find a moderately > > complex function/class that actually works in all cases. So > if anybody > > is interested in what I have so far I am willing to post it to the > > list, but I don't think it is ever going to be a robust solution. > > > > Hi Mark - even if it's not perfect you can post it on the > list: we would be interested in having a look. > > Thanks! > > Christophe > > > regards, > > > > Mark van Doesburg > > > > _______________________________________________ > > gmsh mailing list > > [email protected] > > http://www.geuz.org/mailman/listinfo/gmsh > > > > > > > -- > Prof. Christophe Geuzaine > University of Liege, Electrical Engineering and Computer > Science http://www.montefiore.ulg.ac.be/~geuzaine > > _______________________________________________ > gmsh mailing list > [email protected] > http://www.geuz.org/mailman/listinfo/gmsh > _____________________________________________________________________ ERBE Elektromedizin GmbH Firmensitz: 72072 Tuebingen Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede Registergericht: Stuttgart HRB 380137 _______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
