Dear Mr. Geuzaine and Mr. Remacle, I am using Gmsh ( only the GUI ) in combination with Engrid and Openfoam.
For a well import of Gmsh data into Engrid, I have to define physical groups via ... Geometry / Physical Groups / Add / Surface ... but I have to select each single surface. For complex geometries with perhaps 100 different surfaces or more it is a lot of work. Do you have an idea, how I can select in the GUI all surfaces at once ? Is there a command in the menu or a shortcut, which I could not found ? Do you have an idea or a tipp ? Thanks a lot in advance !!! Yours sincerely, Klaus Räbiger -- LEISTRITZ Pumpen GmbH Markgrafenstr. 29-39, D-90459 Nuernberg Telefon/Phone: +49 911 4306-0 Fax: +49 911 4306-439 Internet: www.leistritz.com Geschaeftsfuehrung/Managing Directors: Dipl.-Ing. Joerg Narewski Dipl.-Ing. Rolf Quast Dipl.-Ing. Michael Schauerte Dipl.-Ing. Friedrich Sippel Sitz der Gesellschaft/Registered Office: Nuernberg Handelsregister/Commercial Register: HRB 17819, Registergericht Nuernberg USt-IdNr./VAT-No.: DE813089359 St.-Nr.: 241/115/90148 _______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
