Räbiger wrote: > Dear Mr. Geuzaine and Mr. Remacle, > > I am using Gmsh ( only the GUI ) in combination with Engrid and Openfoam. > > For a well import of Gmsh data into Engrid, I have to define physical > > groups via ... Geometry / Physical Groups / Add / Surface ... > > but I have to select each single surface. For complex geometries > > with perhaps 100 different surfaces or more it is a lot of work. > > Do you have an idea, how I can select in the GUI all surfaces at once ? > > Is there a command in the menu or a shortcut, which I could not found ? > > Do you have an idea or a tipp ? Thanks a lot in advance !!! >
Use "ctrl+mouse click" : this will start a rectangular selection > Yours sincerely, > > Klaus Räbiger > -- > LEISTRITZ Pumpen GmbH > Markgrafenstr. 29-39, D-90459 Nuernberg > Telefon/Phone: +49 911 4306-0 Fax: +49 911 4306-439 > Internet: www.leistritz.com > > Geschaeftsfuehrung/Managing Directors: > Dipl.-Ing. Joerg Narewski > Dipl.-Ing. Rolf Quast > Dipl.-Ing. Michael Schauerte > Dipl.-Ing. Friedrich Sippel > > Sitz der Gesellschaft/Registered Office: Nuernberg > Handelsregister/Commercial Register: HRB 17819, Registergericht Nuernberg > USt-IdNr./VAT-No.: DE813089359 St.-Nr.: 241/115/90148 > > > _______________________________________________ > gmsh mailing list > [email protected] > http://www.geuz.org/mailman/listinfo/gmsh > > -- Prof. Christophe Geuzaine University of Liege, Electrical Engineering and Computer Science http://www.montefiore.ulg.ac.be/~geuzaine _______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
