Ok, but if I draw my 2D domain, and then I extrude the surface in z
direction in order to have the 3D, there are some guidelines to mesh
with a boundary layer? So, the problem is that if I mesh wit
extrude{surface{}}, I can't create the "lateral" surfaces and then I
can't create the external volume... The other option is to draw by
myself some extruded lines around the body and then do a transfinite
mesh inside those lines, but is quite tedious...
Thanks, Ivan
David Colignon wrote:
Hi Ivan,
yes, it doesn't work with lines. In your case you will have to
construct a 3D geometry "by hand" and mesh it.
Cheers,
Dave
--
---------------------------------------------------------
Ivan Flaminio Cozza
PhD Student - Aeroacoustics Research Group
DIASP - Dipartimento di Ingegneria Aeronautica e Spaziale
Politecnico di Torino
Corso Duca degli Abruzzi, 24
Torino (To)
10129 Italy
e-mail: [email protected]
tel : +39 011 0906839
---------------------------------------------------------
_______________________________________________
gmsh mailing list
[email protected]
http://www.geuz.org/mailman/listinfo/gmsh
