can you send us the brep ?
Le 08-juil.-10 à 12:36, Jan Schmitz a écrit :
Dear all,
I am trying to mesh a sphere that I have created in Salome and saved
in either BREP,STL,STEP or IGES format.
Opening any of those geometries in Gmsh shows nothing, except for
the STL format which shows a surface triangular representation of
the sphere. Is this expected behaviour?
Running any of these commands produces empty meshes or error messages:
gmsh -3 Sphere_1.brep
gmsh -3 Sphere_1.stl
gmsh -3 Sphere_1.step
gmsh -3 Sphere_1.iges
Is the reason that a sphere has no edges? If yes, what steps are
required to save geometries with spherical boundaries in Salome and
to create a 3D tetrahedral mesh for them using Gmsh?
Btw, creating a Box in Salome and have Gmsh create a 3D mesh for
this box works fine.
Thanks
Jan
_______________________________________________
gmsh mailing list
[email protected]
http://www.geuz.org/mailman/listinfo/gmsh
------------------------------------------------------------------
Prof. Jean-Francois Remacle
Universite catholique de Louvain (UCL)
Ecole Polytechnique de Louvain (EPL) - Louvain School of Engineering
Institute of Mechanics, Materials and Civil Engineering (iMMC)
Center for Systems Engineering and Applied Mechanics (CESAME)
Tel : +32-10-472352 -- Mobile : +32-473-909930
_______________________________________________
gmsh mailing list
[email protected]
http://www.geuz.org/mailman/listinfo/gmsh
