Hi Serban, I don't know what the error message means. What I know is that "Cut and merge faces" works only for planar surfaces, not for curved ones. I am working on a solution for curved surfaces, but it is not finished yet.
Matthias ________________________________ Von: [email protected] [mailto:[email protected]] Gesendet: Freitag, 10. Juni 2011 10:43 An: Zenker, Dr. Matthias Cc: [email protected] Betreff: RE: [Gmsh] Meshing of compound volumes Dear Matthias, Thank you for your quick reply. Meshing worked fine after selecting the option you specified. However, when I tried the same thing with a more complex problem (e.g., lots of curved surfaces), I got the following error while opening the STEP file: Error: TopOpenBRepBuild Builder::splitON then I got again intersecting surfaces errors while meshing. Could the curved boundaries be the cause? Thanks, Serban From: Zenker, Dr. Matthias [mailto:[email protected]] Sent: 09 June 2011 11:42 To: Serban Georgescu; [email protected] Subject: AW: [Gmsh] Meshing of compound volumes Hi, you can try Options->Geometry->General->"Cut and merge faces" before meshing. This should work for duplicated planar faces. A more general solution is being worked on (by me, actually...). HTH, Matthias ________________________________ Von: [email protected] [mailto:[email protected]] Gesendet: Mittwoch, 8. Juni 2011 18:26 An: [email protected] Betreff: [Gmsh] Meshing of compound volumes Hi all, I have quick question regarding the meshing of compound volumes. I have a simple geometry, basically two cubes stacked together and sharing one face. If I fuse the blocks, then there is only one volume and meshing works correctly. However, if I export as a compound volume, so two volumes sharing one face, Gmsh gives loads of errors. Is there a way to mesh such compounds in Gmsh? Thanks for your time, Serban ______________________________________________________________________ Fujitsu Laboratories of Europe Limited Hayes Park Central, Hayes End Road, Hayes, Middlesex, UB4 8FE Registered No. 4153469 This e-mail and any attachments are for the sole use of addressee(s) and may contain information which is privileged and confidential. Unauthorised use or copying for disclosure is strictly prohibited. The fact that this e-mail has been scanned by Trendmicro Interscan does not guarantee that it has not been intercepted or amended nor that it is virus-free. ______________________________________________________________________ Fujitsu Laboratories of Europe Limited Hayes Park Central, Hayes End Road, Hayes, Middlesex, UB4 8FE Registered No. 4153469 This e-mail and any attachments are for the sole use of addressee(s) and may contain information which is privileged and confidential. Unauthorised use or copying for disclosure is strictly prohibited. The fact that this e-mail has been scanned by Trendmicro Interscan does not guarantee that it has not been intercepted or amended nor that it is virus-free.
_______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
