Hi, Mikhail!
Yes, I can read Russian and I have found the problem! Thank you, Mikhail!
The problem was that the example file from wiki did not have volume
definition part. I have added following lines:
Surface Loop(1) = { 5, 8, 11, 14, 17, 20, 23, 26 };
Volume(1) = { 1 };
and 3D FEM mesh was successfully created.
Sincerely,
Alexander
On Sun, Jun 3, 2012 at 5:14 PM, Mikhail Artemiev <[email protected]>wrote:
> Hi, Alexander!
> If you can read Russian, you can look at http://numlab.blogspot.com/**
> 2011/06/gmsh-3d.html <http://numlab.blogspot.com/2011/06/gmsh-3d.html>for
> detailed step-by-step instructions on how to build 3D mesh in Gmsh
> (sphere-in-cube geometry is considered, so it's almost your case!).
>
> Best regards,
> Mikhail Artemiev
>
_______________________________________________
gmsh mailing list
[email protected]
http://www.geuz.org/mailman/listinfo/gmsh
