Bonjour, J'aimerais mailler une couche limite en gmsh dans un maillage non structuré. Je commence par un exemple basique d'un cube dans lequel je veux faire une couche limite sur une des faces (voir input ci-dessous). Le raffinement tangentiel à la face se produit bien, mais pas le raffinement normal que j'impose à 0.02. Pourriez-vous m'indiquer ce qui n'est pas correct dans cet exercice ?
Merci, Pierre DULIEU Design Engineer - Modelisation & Calculations Nuclear Department [cid:[email protected]] TRACTEBEL ENGINEERING (GDF SUEZ) Avenue Ariane 7 - 1200 Brussels - BELGIUM tel. +32 2 773 81 73 - fax +32 2 773 00 00 mob. +32 473 74 96 16 [email protected]<mailto:[email protected]> www.engineering-gdfsuez.com [cid:[email protected]]<https://twitter.com/#!/TractebelEngine> [cid:[email protected]] <http://www.linkedin.com/company/tractebel-engineering> [cid:[email protected]] <http://www.youtube.com/user/TractebelEngineering> VAT BE 0412 639 681 RPR/RPM Brussels Before printing - think environment // -- Définition de la géométrie Point(1) = {0,0,0,0.2}; Point(2) = {1,0,0,0.2}; Point(3) = {0,1,0,0.2}; Point(4) = {1,1,0,0.2}; Line(1) = {3, 4}; Line(2) = {4, 2}; Line(3) = {2, 1}; Line(4) = {1, 3}; Line Loop(5) = {1, 2, 3, 4}; Plane Surface(6) = {5}; Extrude {0, 0, 1} { Surface{6}; } // -- Couche limite Field[3] = BoundaryLayer; Field[3].NodesList = {1,2,3,4}; Field[3].EdgesList = {1,2,3,4}; Field[3].FacesList = {6}; Field[3].hwall_n = 0.02; Field[3].hwall_t = 0.1; Field[3].hfar = 0.2; Field[3].ratio = 1.1; Field[3].thickness = 0.2; // -- Background Field // ------------------- Field[10] = Min; Field[10].FieldsList = {3}; Background Field = 10; GDF SUEZ Mail Disclaimer: http://www.gdfsuez.com/disclaimer/disclaimer-fr.html
<<inline: image001.gif>>
<<inline: image002.png>>
<<inline: image003.png>>
<<inline: image004.png>>
_______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
