Le 28 juin 2013 à 10:33, [email protected] a écrit : > Bonjour, > > J’aimerais mailler une couche limite en gmsh dans un maillage non structuré. > Je commence par un exemple basique d’un cube dans lequel je veux faire une > couche limite sur une des faces (voir input ci-dessous). > Le raffinement tangentiel à la face se produit bien, mais pas le raffinement > normal que j’impose à 0.02. > Pourriez-vous m’indiquer ce qui n’est pas correct dans cet exercice ?
Les couches limites en 3D ne sont pas encore disponibles. J'y travaille très fort et je vous tiens au courant quand une version beta sera disponible JFR > > Merci, > > Pierre DULIEU > Design Engineer - Modelisation & Calculations > Nuclear Department > > <image001.gif> > > TRACTEBEL ENGINEERING (GDF SUEZ) > Avenue Ariane 7 - 1200 Brussels - BELGIUM > tel. +32 2 773 81 73 - fax +32 2 773 00 00 > mob. +32 473 74 96 16 > [email protected] > www.engineering-gdfsuez.com > > <image002.png> <image003.png> <image004.png> > > VAT BE 0412 639 681 RPR/RPM Brussels > > Before printing – think environment > > > > // -- Définition de la géométrie > Point(1) = {0,0,0,0.2}; > Point(2) = {1,0,0,0.2}; > Point(3) = {0,1,0,0.2}; > Point(4) = {1,1,0,0.2}; > Line(1) = {3, 4}; > Line(2) = {4, 2}; > Line(3) = {2, 1}; > Line(4) = {1, 3}; > Line Loop(5) = {1, 2, 3, 4}; > Plane Surface(6) = {5}; > Extrude {0, 0, 1} { > Surface{6}; > } > > // -- Couche limite > Field[3] = BoundaryLayer; > Field[3].NodesList = {1,2,3,4}; > Field[3].EdgesList = {1,2,3,4}; > Field[3].FacesList = {6}; > Field[3].hwall_n = 0.02; > Field[3].hwall_t = 0.1; > Field[3].hfar = 0.2; > Field[3].ratio = 1.1; > Field[3].thickness = 0.2; > > > // -- Background Field > // ------------------- > Field[10] = Min; > Field[10].FieldsList = {3}; > Background Field = 10; > > > GDF SUEZ Mail Disclaimer: http://www.gdfsuez.com/disclaimer/disclaimer-fr.html > > > _______________________________________________ > gmsh mailing list > [email protected] > http://www.geuz.org/mailman/listinfo/gmsh ------------------------------------------------------------------ Prof. Jean-Francois Remacle Universite catholique de Louvain (UCL) Ecole Polytechnique de Louvain (EPL) - Louvain School of Engineering Institute of Mechanics, Materials and Civil Engineering (iMMC) Center for Systems Engineering and Applied Mechanics (CESAME) Tel : +32-10-472352 -- Mobile : +32-473-909930
_______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
