Hi Matthias, Thanks a lot for your answer, now I understand this feature.
best regards, Benjamin Le mercredi 09 octobre 2013 à 07:10 +0000, Zenker, Dr. Matthias a écrit : > Hi Benjamin, > > to apply "cut and merge faces", check the corresponding item (under > Tools->Options->Geometry->General) and load your geometry (e.g. in STEP > format). Then duplicated faces may be cleaned so that you get a conformal > mesh. IF your geometry does not appear at all, try if you can load it with > "cut and merge faces" unchecked. If this works, the healing has failed before > and you cannot use the feature for this geometry. > I don't know of any detailed documentation about the "cut and merge faces" > functionality. > > HTH, > > Matthias > > > -----Ursprüngliche Nachricht----- > > Von: benjamin JEANTY-RUARD [mailto:[email protected]] > > Gesendet: Mittwoch, 2. Oktober 2013 14:02 > > An: [email protected] > > Betreff: [Gmsh] Cut and merge faces > > > > Dear Gmsh team, > > > > I would like to use the "cut and merge faces" feature available in > > tools->Options->Geometry->General but I do not find documentation about > > it. > > > > I read in Gmsh mailing list, it works with plane surfaces and no with ruled > > surfaces but even with plane surfaces I do not understand how it works and I > > fail to apply this feature. > > > > I would like to know if someone can explain to me how this feature works or > > help me to find a documentation about it (geo format or STL format, if faces > > has intersections with others or not, hole in volume or not, ...) > > > > Kind regards, > > > > Benjamin > > > > -- > > > > > > Benjamin JEANTY-RUARD > > > > -------------------- > > Artenum Toulouse - Science & Groupware > > http://www.artenum.com > > > > Bâtiment Calfocenter > > 10, rue Marguerite Long > > 31320 Castanet-Tolosan > > France > > Phone: +33 (0)5 82 95 19 00 > > > > > > > > > > > > _____________________________________________________________________ > ERBE Elektromedizin GmbH > Firmensitz: 72072 Tuebingen > Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede > Registergericht: Stuttgart HRB 380137 > -- Benjamin JEANTY-RUARD -------------------- Artenum Toulouse - Science & Groupware http://www.artenum.com Bâtiment Calfocenter 10, rue Marguerite Long 31320 Castanet-Tolosan France Phone: +33 (0)5 82 95 19 00 _______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
