gmsh  

Messages by Thread

• [Gmsh] Zoom along a single dimension Torquil Macdonald Sørensen
• [Gmsh] Zooming in batch mode Nitskiy A.
• [Gmsh] RE 3D Cylinders in GMSH jean pierre aubry
• [Gmsh] "Line Loop is wrong" error Manav Bhatia
  • Re: [Gmsh] "Line Loop is wrong" error look
• [Gmsh] Bug report (Print in batch mode) Nitskiy A.
  • Re: [Gmsh] Bug report (Print in batch mode) Christophe Geuzaine
• [Gmsh] Create curvature surface with three line by gmsh Nguyen Dung
• [Gmsh] BREP to GEO Kyle Hoffman
  • Re: [Gmsh] BREP to GEO Nicolas Marsic
• [Gmsh] Error: unable to recover an edge Caroline Geiersbach
• [Gmsh] help with Transfinite Line and 2D mesh nedded Maurer, Claudia
• [Gmsh] annoying warning while duplicating lists jean pierre aubry
• [Gmsh] Print value of a list item look
  • Re: [Gmsh] Print value of a list item David Colignon
  • Re: [Gmsh] Print value of a list item look
  • Re: [Gmsh] Print value of a list item David Colignon
• [Gmsh] Warning: jac < 0 Aleksejs Fomins
  • Re: [Gmsh] Warning: jac < 0 Rene Schneider
  • Re: [Gmsh] Warning: jac < 0 Aleksejs Fomins
• Re: [Gmsh] building 3D mesh from 2D surfaces David Colignon
  • Re: [Gmsh] building 3D mesh from 2D surfaces RENARD Francois
• [Gmsh] Include pos-File: syntax error Nagel Cristian (RB Doktorandenprogramm, CR/ARY2)
  • Re: [Gmsh] Include pos-File: syntax error David Colignon
• [Gmsh] Gmsh boundary elements are displayed with repeated physical IDs and seems duplicated Agnese, Marco
• [Gmsh] Gmsh Non-interactive Jake Brantley
  • Re: [Gmsh] Gmsh Non-interactive lukshuntim
  • Re: [Gmsh] Gmsh Non-interactive Jake Brantley
• [Gmsh] Gmsh Non-interactive mesh generation jakebrantley
  • Re: [Gmsh] Gmsh Non-interactive mesh generation david . colignon
• [Gmsh] Problem with thresholdfield in combination with physical lines Sebastian Otten
• [Gmsh] python wrapper for gmsh Falk Heße
  • Re: [Gmsh] python wrapper for gmsh David Colignon
• [Gmsh] *surface group in Gmsh Gábor Tóth
• [Gmsh] Points' identification number change after reloading look
• [Gmsh] local_compilation Eligiusz Postek
• [Gmsh] Gmsh user help 3.14
  • Re: [Gmsh] Gmsh user help Geordie McBain
  • Re: [Gmsh] Gmsh user help Geordie McBain
• [Gmsh] Quadrilateral Quality Measure Joseph Ferguson
• [Gmsh] RE Assigning integer/string to elements in a physical entity? jean pierre aubry
• [Gmsh] Fl Eligiusz Postek
• [Gmsh] gmshpy Eligiusz Postek
• [Gmsh] Intersected Boundary Layer and Distorted Mesh Yun Zhi Law
• [Gmsh] Inquiry about possibility of using gmsh Arkadiusz Justyna 193504
  • Re: [Gmsh] Inquiry about possibility of using gmsh Jose A. Abell M.
• [Gmsh] done 2D quadrilateral mesh using Gmsh 3.14
  • Re: [Gmsh] SPAM done 2D quadrilateral mesh using Gmsh Theler German Guillermo
• [Gmsh] Assigning integer/string to elements in a physical entity? Kyle Hoffman
  • Re: [Gmsh] Assigning integer/string to elements in a physical entity? Theler German Guillermo
• [Gmsh] Sphere with a hole T . Woźniak
• [Gmsh] Mesh connection between 2 surfaces Leonardo Roncetti
  • [Gmsh] Mesh connection between 2 surfaces Leonardo Roncetti
• [Gmsh] Problem with meshing a ridge with an extrusion of 20 mm look
• [Gmsh] How to use data .txt to create mesh saber . chelaghma
• [Gmsh] meshing circular inclusions with desired element size Nguyen Vinh Phu
  • Re: [Gmsh] meshing circular inclusions with desired element size Johannes Wimmer
  • Re: [Gmsh] meshing circular inclusions with desired element size Nguyen Vinh Phu
  • Re: [Gmsh] meshing circular inclusions with desired element size Jose Paulo Moitinho de Almeida
  • Re: [Gmsh] meshing circular inclusions with desired element size Nguyen Vinh Phu
  • Re: [Gmsh] meshing circular inclusions with desired element size Jose Paulo Moitinho de Almeida
  • Re: [Gmsh] meshing circular inclusions with desired element size Theler German Guillermo
  • Re: [Gmsh] meshing circular inclusions with desired element size Saber Ayoub Chelaghma
  • Re: [Gmsh] meshing circular inclusions with desired element size Nguyen Vinh Phu
  • Re: [Gmsh] meshing circular inclusions with desired element size Saber Ayoub Chelaghma
• [Gmsh] Hex-dominant meshing of STL surface Gunnar Jansen
• [Gmsh] RE How can I create certain number of elements on surface edges of my geometry? jean pierre aubry
• [Gmsh] How does GMSH know which side of a surface is the INside? John Villarrubia
  • Re: [Gmsh] How does GMSH know which side of a surface is the INside? Theler German Guillermo
  • Re: [Gmsh] How does GMSH know which side of a surface is the INside? John Villarrubia
  • Re: [Gmsh] How does GMSH know which side of a surface is the INside? Theler German Guillermo
• [Gmsh] How can I create certain number of elements on surface edges of my geometry? Mohammad Marvi-Mashhadi
• [Gmsh] Changing the angle threshold for recombining to degenerate quadrangles jan .
  • [Gmsh] Changing the angle threshold for recombining to degenerate quadrangles jan .
  • [Gmsh] Changing the angle threshold for recombining to degenerate quadrangles jan .
• [Gmsh] Keeping track of surfaces after geometry reparation Schwaner, Stephen A
• [Gmsh] Imported stl mesh size control look
• [Gmsh] 3D to 2D Kopanicakova Alena
  • Re: [Gmsh] 3D to 2D Geordie McBain
• [Gmsh] Trouble with Gmsh install on Mac Chaid Schwarz
  • Re: [Gmsh] Trouble with Gmsh install on Mac James Battat
  • Re: [Gmsh] Trouble with Gmsh install on Mac David Bernstein
  • Re: [Gmsh] Trouble with Gmsh install on Mac Christophe Geuzaine
• [Gmsh] GPL vs LGPL Robert Michael O'Bara
  • Re: [Gmsh] GPL vs LGPL Jean-François Remacle
  • Re: [Gmsh] GPL vs LGPL j s
• [Gmsh] Weird error (literally) John Villarrubia
• [Gmsh] High Order Nodes from the (python) API Michael Scheerer
• [Gmsh] About second order mesh on 3D hemisphere cylinder. Xiaodong Liu
• [Gmsh] What does "Impossible to smooth vertex" error mean? John Villarrubia
• [Gmsh] Trouble Meshing Open Surface Hayan Nasser
• [Gmsh] characteristic length Ningfeng HUANG
  • Re: [Gmsh] characteristic length Mikhail Artemyev
• [Gmsh] Strange error Przemysław Król
  • Re: [Gmsh] Strange error Christophe Geuzaine
• [Gmsh] Gmsh installation on a mac James Battat
  • Re: [Gmsh] Gmsh installation on a mac Christophe Geuzaine
  • Re: [Gmsh] Gmsh installation on a mac James Battat
• Re: [Gmsh] Remesh STL Serban.Georgescu
• [Gmsh] Visualisation of field in tetrahedral mesh Родион Жуковский
  • Re: [Gmsh] Visualisation of field in tetrahedral mesh Aleksejs Fomins
• [Gmsh] Gmsh/FiPy Valentina
• [Gmsh] Generation of grids that satisfy reflection symmetry moritz braun
• [Gmsh] Upgrade Errors Feola, Andrew J
  • Re: [Gmsh] Upgrade Errors Christophe Geuzaine
  • Re: [Gmsh] Upgrade Errors Christophe Geuzaine
• [Gmsh] - Definition of volume with complex concave holes on the boundaries Simone Falco
  • Re: [Gmsh] - Definition of volume with complex concave holes on the boundaries David Colignon
• [Gmsh] gmsh runtime error Peter Johnston
  • Re: [Gmsh] gmsh runtime error Christophe Geuzaine
• [Gmsh] Interior Element Growth Johannes Wimmer
  • [Gmsh] Interior Element Growth Johannes Wimmer
• [Gmsh] Suspect self-intersecting curvilinear geometry Aleksejs Fomins
• [Gmsh] meshGFace bounding box extension Alexander Tismer
• [Gmsh] Gmsh is stuck when trying to re-orient normals Martin Vymazal
• [Gmsh] Unstructured mesh with topological defects David Fernández
• [Gmsh] Partitioning information Ganesh Diwan
• [Gmsh] Help with script for Gmsh Родион Жуковский
  • Re: [Gmsh] Help with script for Gmsh Mikhail Artemyev
  • Re: [Gmsh] Help with script for Gmsh [email protected]
  • [Gmsh] Help with script for Gmsh Родион Жуковский
• [Gmsh] Aircraft mesh with curved elements Martin Vymazal
• Re: [Gmsh] Problem: Save .geo as .pdf image vector file. michael.asam
• [Gmsh] Create a mesh on a given image. Valentina
  • Re: [Gmsh] Create a mesh on a given image. David Colignon
  • Re: [Gmsh] Create a mesh on a given image. Valentina Soccorso
  • Re: [Gmsh] Create a mesh on a given image. David Colignon
  • Re: [Gmsh] Create a mesh on a given image. Valentina Soccorso
• [Gmsh] Discussion: mesh changes on ruled surface, not on extruded or plane surface. ryan kim
• [Gmsh] msh output should keep all elements when physical ID is defined ryan kim
  • Re: [Gmsh] msh output should keep all elements when physical ID is defined Theler German Guillermo
• [Gmsh] Undefined reference when building Gmsh with OpenCascade under Windows Xin Liu
• [Gmsh] Bug in Transfinite Surface meshing Alexander Tismer
• [Gmsh] Bug in Transfinite Surface Mesh Alexander Tismer
• [Gmsh] Print a limited area of the view to a figure. pavel . v . ponomarev
• [Gmsh] Save a particular region to the figure Pavel Ponomarev
• [Gmsh] Inconsistency of node ordering Orxan Shibliyev
• [Gmsh] Closed loop error in simple 2D mesh Balemans, C.
  • Re: [Gmsh] Closed loop error in simple 2D mesh Vincent Huber
  • Re: [Gmsh] Closed loop error in simple 2D mesh Balemans, C.
• [Gmsh] STEP to Nastran BDF iCy-fLaME
• [Gmsh] multi-domain mesh w/ polyhedral surfaces Rifat Aras
  • [Gmsh] multi-domain mesh w/ polyhedral surfaces Rifat Aras
• [Gmsh] Updating multiple runtime views Nigel Nunn
• [Gmsh] Asking for help about Gmsh. wzc1594260119
• [Gmsh] Abandoning transform and getting points/lines/surfaces instead Paweł Maciakowski
  • Re: [Gmsh] Abandoning transform and getting points/lines/surfaces instead David Colignon
  • Re: [Gmsh] Abandoning transform and getting points/lines/surfaces instead Paweł Maciakowski
  • [Gmsh] Problem with 3D mesh and embedded surface Alessandro Vicini
  • Re: [Gmsh] Problem with 3D mesh and embedded surface Vincent Huber
• [Gmsh] problem with Plane Surface Riccardo Giordano
• [Gmsh] Connecting structured and unstructured mesh Jasper
• Re: [Gmsh] Difficulty with generating a volume mesh from a stl file Geordie McBain
  • Re: [Gmsh] Difficulty with generating a volume mesh from a stl file David Love
  • Re: [Gmsh] Difficulty with generating a volume mesh from a stl file Geordie McBain
• [Gmsh] How to do nodes reordering in gmsh xiang daopu
  • Re: [Gmsh] How to do nodes reordering in gmsh Christophe Geuzaine
• [Gmsh] For 1D mesh, after refine by splitting, the segment nodes is wrong xiang daopu
• [Gmsh] 3D recombination algorithm failure. John Moore
• [Gmsh] Plotting a 3 Niko9310
• Re: [Gmsh] Problem creating surface Christophe Geuzaine
  • Re: [Gmsh] Problem creating surface Maik Hoffmann
• [Gmsh] remesh & boundary nodes Christian Ferrarin
• [Gmsh] Saving volume mesh in STL format Rémi Blandin
  • Re: [Gmsh] Saving volume mesh in STL format Theler German Guillermo
  • Re: [Gmsh] Saving volume mesh in STL format Rémi Blandin
• [Gmsh] Help for calling GMSH Kumar, Dharmendra
• [Gmsh] RE cut hole into half space jean pierre aubry
  • Re: [Gmsh] RE cut hole into half space Jaco Du Plessis
• [Gmsh] Trick to create arcs of a circle using Bsplines paul . carrico
• [Gmsh] Record geometryi a gif file using command-line mode paul . carrico
• [Gmsh] 3D meshing - problem Chara Kitsaki
  • Re: [Gmsh] 3D meshing - problem Theler German Guillermo
  • Re: [Gmsh] 3D meshing - problem Chara Kitsaki
  • Re: [Gmsh] 3D meshing - problem Ruth Vazquez Sabariego
  • Re: [Gmsh] 3D meshing - problem Chara Kitsaki
• [Gmsh] Create prismatic layer around imported *.stl file look
  • Re: [Gmsh] Create prismatic layer around imported *.stl file Theler German Guillermo
• [Gmsh] 1D high-order meshing Martin Vymazal
  • Re: [Gmsh] 1D high-order meshing Martin Vymazal
  • Re: [Gmsh] 1D high-order meshing Martin Vymazal
• Re: [Gmsh] Wierd Point in Coherence Christophe Geuzaine
  • Re: [Gmsh] Wierd Point in Coherence Jaco Du Plessis
• [Gmsh] Optimising binary .msh format Michael Lange
  • Re: [Gmsh] Optimising binary .msh format Christophe Geuzaine
• [Gmsh] Gmsh TetraP2 Peyret Christophe
• [Gmsh] connecting a spherical to a planar surface Eloïse Croonenborghs
• [Gmsh] gmsh crashing in mac osx 10.3.3 Matze Beuther
  • Re: [Gmsh] gmsh crashing in mac osx 10.3.3 Christophe Geuzaine
• [Gmsh] Question about attractor Harshad Sahasrabudhe
• [Gmsh] High order visualization: hybrid meshes? Jesse Chan
• [Gmsh] Geometry import Yu Jing
  • Re: [Gmsh] Geometry import Geordie McBain
• [Gmsh] Error for centerline mesh Nasrollah Hajaliakbari
• [Gmsh] FSI Meshing Problem Maimouna
• [Gmsh] selective views of electron trajectories Danny Holstein
• [Gmsh] Create a parabola using BSplines Arnaud Trouche
• [Gmsh] the following geo file produces a segmentation fault moritz braun
  • Re: [Gmsh] the following geo file produces a segmentation fault David Bernstein
• [Gmsh] Creating a domain with holes. i.e. inner boundaries from merged .stl files moritz braun

• Earlier messages
• Later messages