Hi, can FreeCAD save in STEP format? If so, this would be better suited for import in gmsh. The only problem you will get is thatif your geometry has more than one volume, common faces between volumes will get two nonconformal meshes.
HTH, Matthias Von: Paolo Tricerri [mailto:[email protected]] Gesendet: Montag, 16. Dezember 2013 16:36 An: [email protected] Betreff: [Gmsh] Do FreeCAD and GMSH work together? Dear Sirs, I am writing you because I have a problem trying to make FreeCAD (opensource software for CAD drawing http://www.freecadweb.org/ ) and GMSH working together. More specifically, my idea is to create a surface in FreeCAD, save it as *.stl and then open it in GMSH to have the volumetric mesh. Well, so far it has not work and I wonder if any of you have had the same problem. The steps I am doing are this ones: - Create the surface in FreeCAD and save it as *.stl; as example I have created a cylindrical surface in FreeCAD and attached it to the email. The *.stl is saved in binary format from FreeCAD and i have noted that the resolution is really poor. - Given the poor resolution, I would like to remesh the stl file in gmsh before creating the volumetric mesh. To do this, I have followed the tutorial about stl remeshing. I attach to the email the *.geo script I used to remesh. The problem is that the stl file is not remeshed at all. Any help? Another question: has anybody imported CAD draws in GMSH? If yes, with which software were they created? Many thanks for the help, Regards, Paolo Tricerri _____________________________________________________________________ ERBE Elektromedizin GmbH Firmensitz: 72072 Tuebingen Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede Registergericht: Stuttgart HRB 380137
_______________________________________________ gmsh mailing list [email protected] http://www.geuz.org/mailman/listinfo/gmsh
