Re: [Gmsh] Editing imported file in GUI

teobo Tue, 02 Feb 2016 15:11:23 -0800

Hi Aaron,

1) you call this geo from command line or load it from the gui.

Merge "/tmp/2c.step";
//Coherence;
Print "/tmp/c2.geo";

2) you use geo unrolled format in the save as menu after import from command line or load menu.

02.02.2016, 18:56, "Aaron Kiefer" <[email protected]>:

Gents,

I’m attempting to edit a .geo file that I imported as a .step from Solidworks using the GUI in GMSH 2.11. I’d like to display the surfaces

3) Use Tools->options->Mesh or Geometry->Visibility in Gui

-see the video tutorial for it as well.

-use reset viewport mouse context menu, helped sometimes.

- you find everything as non-gui, too.

4) use "Reload" to view your changes, there is as well an embedded editor, though ...

as shaded solids so I know which ones I’m selecting. The ‘solid’ surface display is selected in the geometry/visibility tab but GMSH appears to be showing the ‘wireframe’ or maybe the ‘cross’ surface display?

Thanks in advance,

Good Luck

Aaron J. Kiefer MSME, PE
Accident Research Specialists, PLLC
1631 NW Maynard Road, Suite 101
Cary, NC 27513
Phone: (919) 467-8134
Fax:        (919) 678-1261
Cell:        (919) 810-8429
Email:    [email protected]
Web:      www.accident-research.com
Email Confidentiality Notice: The information contained in this transmission is confidential, proprietary, and/or privileged. The message is intended for the sole use of the individual or entity to whom it is addressed. If you are not the intended recipient, please be advised that any use, distribution, or copying of the message is strictly prohibited and may be subject to penalties, If you received this transmission in error, please contact the sender immediately and delete this material from any computer.

,
_______________________________________________
gmsh mailing list
[email protected]
http://onelab.info/mailman/listinfo/gmsh

_______________________________________________
gmsh mailing list
[email protected]
http://onelab.info/mailman/listinfo/gmsh

Re: [Gmsh] Editing imported file in GUI

Reply via email to