> On 03 Feb 2016, at 03:28, Aaron Kiefer <[email protected]> wrote: > > GMSH Users, > > I’ve suffered through a few hours of removing volumetric parts of my.geo file > so it can be meshed in 2D. From working through the menus with GMSH, it > appears that the .geo file cannot be displayed with solid surfaces as a .step > file can? If anyone has ideas, please let me know – I’m going cross eyed > staring at the little crossed surface regions trying to determine which > surface belongs where.
Indeed... As a workaround, just mesh the surfaces - you can then select them by clicking the mesh. > > Thanks, > > > Aaron J. Kiefer MSME, PE > Accident Research Specialists, PLLC > 1631 NW Maynard Road, Suite 101 > Cary, NC 27513 > Phone: (919) 467-8134 > Fax: (919) 678-1261 > Cell: (919) 810-8429 > Email: [email protected] > Web: www.accident-research.com > Email Confidentiality Notice: The information contained in this transmission > is confidential, proprietary, and/or privileged. The message is intended for > the sole use of the individual or entity to whom it is addressed. If you are > not the intended recipient, please be advised that any use, distribution, or > copying of the message is strictly prohibited and may be subject to > penalties, If you received this transmission in error, please contact the > sender immediately and delete this material from any computer. > > > > From: Aaron Kiefer > Sent: Tuesday, February 2, 2016 9:06 AM > To: '[email protected]' > Subject: Editing imported file in GUI > > Gents, > > I’m attempting to edit a .geo file that I imported as a .step from Solidworks > using the GUI in GMSH 2.11. I’d like to display the surfaces as shaded > solids so I know which ones I’m selecting. The ‘solid’ surface display is > selected in the geometry/visibility tab but GMSH appears to be showing the > ‘wireframe’ or maybe the ‘cross’ surface display? > > Thanks in advance, > > Aaron J. Kiefer MSME, PE > Accident Research Specialists, PLLC > 1631 NW Maynard Road, Suite 101 > Cary, NC 27513 > Phone: (919) 467-8134 > Fax: (919) 678-1261 > Cell: (919) 810-8429 > Email: [email protected] > Web: www.accident-research.com > Email Confidentiality Notice: The information contained in this transmission > is confidential, proprietary, and/or privileged. The message is intended for > the sole use of the individual or entity to whom it is addressed. If you are > not the intended recipient, please be advised that any use, distribution, or > copying of the message is strictly prohibited and may be subject to > penalties, If you received this transmission in error, please contact the > sender immediately and delete this material from any computer. > > <Planar Geometry.PNG>_______________________________________________ > gmsh mailing list > [email protected] > http://onelab.info/mailman/listinfo/gmsh -- Prof. Christophe Geuzaine University of Liege, Electrical Engineering and Computer Science http://www.montefiore.ulg.ac.be/~geuzaine Tetrahedron V, July 4-5 2016: http://tetrahedron.montefiore.ulg.ac.be Free software: http://gmsh.info | http://getdp.info | http://onelab.info _______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
