Thank you very much Ugis. It solved my problem. Deepak
On 27 August 2016 at 11:06, Uģis Lācis <[email protected]> wrote: > Hi Deepak, > > recently we had similar discussion in this same mailing list. Look up this > mail and following responses: > http://onelab.info/pipermail/gmsh/2016/010618.html > > Based on the following suggestions, I was able to generate conforming > (same nodes at the interface) meshes for my fluid-structure interaction > problem. > > Best, > Ugis > > > On 26/08/16 12:33, Deepak Garg wrote: > > Hi there, > > I am working on fluid-structure interaction problem. I need two different > meshes, one for fluid and another one for structure. Both the meshes must > have the same nodes at the interface. > > Any suggestions or experiences ? > > Thanks. > Deepak > > > _______________________________________________ > gmsh mailing [email protected]http://onelab.info/mailman/listinfo/gmsh > > > > _______________________________________________ > gmsh mailing list > [email protected] > http://onelab.info/mailman/listinfo/gmsh > >
_______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
