Messages by Date
-
2020/12/30
[Gmsh] Shutting down the mailing lists
Christophe Geuzaine
-
2020/12/28
Re: [Gmsh] Reg: Plotting vectors on a triangle at seven different locations
Christophe Geuzaine
-
2020/12/28
Re: [Gmsh] generate mesh in area with (large variation in z
Christophe Geuzaine
-
2020/12/28
Re: [Gmsh] gmsh and Plot3d interactions MISCOMMUNICATION 101
Christophe Geuzaine
-
2020/12/28
Re: [Gmsh] gmsh and Plot3d interactions MISCOMMUNICATION 101
Miroslav Grulovic
-
2020/12/26
[Gmsh] generate mesh in area with (large variation in z
Komal Kumari
-
2020/12/23
[Gmsh] Reg: Plotting vectors on a triangle at seven different locations
Raavi M. Mohindar Rao
-
2020/12/20
Re: [Gmsh] Problem with gmsh mesh in freefem++
Max Orok
-
2020/12/19
[Gmsh] Problem with gmsh mesh in freefem++
Sadia Siddiqa
-
2020/12/18
Re: [Gmsh] Composite RVE
Hossam Ragheb
-
2020/12/18
Re: [Gmsh] Composite RVE (Hossam Ragheb)
Hossam Ragheb
-
2020/12/15
Re: [Gmsh] Silently created boundary entities
Christophe Geuzaine
-
2020/12/14
Re: [Gmsh] Silently created boundary entities
Banks, Stephen (Energy, Clayton North)
-
2020/12/14
Re: [Gmsh] Composite RVE
Christophe Geuzaine
-
2020/12/14
Re: [Gmsh] How to generate a parabaloid or surface from an equation?
Christophe Geuzaine
-
2020/12/14
Re: [Gmsh] Silently created boundary entities
Christophe Geuzaine
-
2020/12/14
Re: [Gmsh] Silently created boundary entities
Banks, Stephen (Energy, Clayton North)
-
2020/12/14
Re: [Gmsh] Composite RVE (Hossam Ragheb)
Baptiste DURAND
-
2020/12/14
Re: [Gmsh] Composite RVE (Hossam Ragheb)
Baptiste DURAND
-
2020/12/14
[Gmsh] Silently created boundary entities
Banks, Stephen (Energy, Clayton North)
-
2020/12/11
Re: [Gmsh] How to generate a parabaloid or surface from an equation?
Matthieu Lecouvez
-
2020/12/10
[Gmsh] Composite RVE
Hossam Ragheb
-
2020/12/07
[Gmsh] How to generate a parabaloid or surface from an equation?
Paul K
-
2020/12/07
Re: [Gmsh] Role of CreateGeometry in Creating Geometry from Mesh
Christophe Geuzaine
-
2020/12/03
Re: [Gmsh] PETSc/DMPlex and .msh
Jed Brown
-
2020/12/03
Re: [Gmsh] PETSc/DMPlex and .msh
Praveen C
-
2020/12/03
Re: [Gmsh] PETSc/DMPlex and .msh
Praveen C
-
2020/12/03
Re: [Gmsh] PETSc/DMPlex and .msh
Jeremy Theler
-
2020/12/03
Re: [Gmsh] PETSc/DMPlex and .msh
Sharan Roongta
-
2020/12/02
Re: [Gmsh] forcing a single element type on a 3D mesh.
Christophe Geuzaine
-
2020/12/02
Re: [Gmsh] PETSc/DMPlex and .msh
Christophe Geuzaine
-
2020/12/02
[Gmsh] PETSc/DMPlex and .msh
Sharan Roongta
-
2020/12/02
Re: [Gmsh] Addition of Dummy point in mesh file
Christophe Geuzaine
-
2020/12/02
Re: [Gmsh] gmsh and Plot3d interactions
Christophe Geuzaine
-
2020/12/01
[Gmsh] Boundary layer mesh: v4.7.1 conditionally crashes
Tian Xia
-
2020/11/29
Re: [Gmsh] constructing trimmed NURBS surfaces
Banks, Stephen (Energy, Clayton North)
-
2020/11/29
Re: [Gmsh] gmsh and Plot3d interactions
Miroslav Grulovic
-
2020/11/29
[Gmsh] Addition of Dummy point in mesh file
Komal Kumari
-
2020/11/27
Re: [Gmsh] gmsh and Plot3d interactions
Christophe Geuzaine
-
2020/11/27
Re: [Gmsh] constructing trimmed NURBS surfaces
Christophe Geuzaine
-
2020/11/26
Re: [Gmsh] constructing trimmed NURBS surfaces
Banks, Stephen (Energy, Clayton North)
-
2020/11/26
Re: [Gmsh] Negative Jacobians in 2nd Order Mesh
Nikhil Vaidya
-
2020/11/26
Re: [Gmsh] Negative Jacobians in 2nd Order Mesh
Christophe Geuzaine
-
2020/11/26
Re: [Gmsh] constructing trimmed NURBS surfaces
Christophe Geuzaine
-
2020/11/25
[Gmsh] constructing trimmed NURBS surfaces
Banks, Stephen (Energy, Clayton North)
-
2020/11/23
Re: [Gmsh] Negative Jacobians in 2nd Order Mesh
Nikhil Vaidya
-
2020/11/17
Re: [Gmsh] Mesh doesn't show when I change Geometry.OCCTargetUnit from "M" to "MM";
Marco Antolovic
-
2020/11/17
Re: [Gmsh] Shared boundaries between two stl model
Christophe Geuzaine
-
2020/11/17
Re: [Gmsh] Mesh doesn't show when I change Geometry.OCCTargetUnit from "M" to "MM";
Christophe Geuzaine
-
2020/11/11
[Gmsh] Shared boundaries between two stl model
Yue Yu
-
2020/11/10
Re: [Gmsh] Question on creating meshes with layered elements
Marco Antolovic
-
2020/11/09
Re: [Gmsh] Fragment + addSurfaceLoop
Bruno
-
2020/11/09
Re: [Gmsh] Question on creating meshes with layered elements
Marco Antolovic
-
2020/11/09
Re: [Gmsh] unrecognized variable loaded from another file using Merge command
Marco Antolovic
-
2020/11/09
Re: [Gmsh] unrecognized variable loaded from another file using Merge command
Marco Antolovic
-
2020/11/08
Re: [Gmsh] Question on creating meshes with layered elements
Marco Antolovic
-
2020/11/06
Re: [Gmsh] unrecognized variable loaded from another file using Merge command
Marco Antolovic
-
2020/11/06
Re: [Gmsh] Can you delete the variables created in the GUI menu?
Marco Antolovic
-
2020/11/04
Re: [Gmsh] Rectangular cutouts in cylinders
Christophe Geuzaine
-
2020/11/04
Re: [Gmsh] Error after Mesh Conversion to OpenFOAM
Christophe Geuzaine
-
2020/11/04
Re: [Gmsh] Problem with creating a mesh in OpenCASCADE kernel
Christophe Geuzaine
-
2020/11/04
Re: [Gmsh] Fragment + addSurfaceLoop
Christophe Geuzaine
-
2020/11/04
Re: [Gmsh] curved mesh and jacobian
Christophe Geuzaine
-
2020/11/04
Re: [Gmsh] unrecognized variable loaded from another file using Merge command
Christophe Geuzaine
-
2020/11/04
Re: [Gmsh] Question on creating meshes with layered elements
Christophe Geuzaine
-
2020/11/04
Re: [Gmsh] Boundary layer field - tangential direction mesh size
Christophe Geuzaine
-
2020/11/04
Re: [Gmsh] curved mesh and jacobian
Christophe Geuzaine
-
2020/11/04
Re: [Gmsh] High Aspect Ratio Cells
Christophe Geuzaine
-
2020/11/04
Re: [Gmsh] Can you delete the variables created in the GUI menu?
Christophe Geuzaine
-
2020/11/03
Re: [Gmsh] Volume not meshing after adding embedded surface
Christophe Geuzaine
-
2020/11/03
Re: [Gmsh] spline with many points
Christophe Geuzaine
-
2020/11/03
[Gmsh] spline with many points
Purvis Bedenbaugh
-
2020/10/30
[Gmsh] Can you delete the variables created in the GUI menu?
Marco Antolovic
-
2020/10/29
[Gmsh] curved mesh and jacobian
françois fraysse
-
2020/10/28
[Gmsh] Boundary layer field - tangential direction mesh size
Tian Xia
-
2020/10/27
Re: [Gmsh] SolidWorks tagging elementary entities
Max Orok
-
2020/10/26
[Gmsh] SolidWorks tagging elementary entities
CHARLES WRIGHT
-
2020/10/26
Re: [Gmsh] integration, spikes
t . eschner
-
2020/10/22
[Gmsh] Question on creating meshes with layered elements
Marco Antolovic
-
2020/10/21
[Gmsh] unrecognized variable loaded from another file using Merge command
Marco Antolovic
-
2020/10/21
[Gmsh] Mesh two volumes conformally
Camillo Rossetto
-
2020/10/21
[Gmsh] Mesh two volumes conformally GMSH
Camillo Rossetto
-
2020/10/17
Re: [Gmsh] Adding a boundary surface on a STL model
Dimitrios Stoupis
-
2020/10/16
[Gmsh] Problem with creating a mesh in OpenCASCADE kernel
Rosicley Júnio Rodrigues Rosa
-
2020/10/10
[Gmsh] Error after Mesh Conversion to OpenFOAM
Razon kumar
-
2020/10/09
Re: [Gmsh] [Gmsh ]One layer of solid elements through thickness instead of two
Pawel Kudela
-
2020/10/08
Re: [Gmsh] [Gmsh ]One layer of solid elements through thickness instead of two
Christophe Geuzaine
-
2020/10/08
[Gmsh] frontal meshing animation
Martin Genet
-
2020/10/08
[Gmsh] Rectangular cutouts in cylinders
Nils Wagner
-
2020/10/07
[Gmsh] [Gmsh ]One layer of solid elements through thickness instead of two
Pawel Kudela
-
2020/10/07
[Gmsh] 2D Unstructured periodic quad mesh
David Fernandez
-
2020/10/06
Re: [Gmsh] Transfinite 3D meshing
Bruno
-
2020/10/06
Re: [Gmsh] How are set up U and V vectors for elements ?
Christophe Geuzaine
-
2020/10/06
Re: [Gmsh] Transfinite 3D meshing
Christophe Geuzaine
-
2020/10/06
Re: [Gmsh] Transfinite 3D meshing
Max Orok
-
2020/10/06
[Gmsh] Transfinite 3D meshing
Bruno
-
2020/10/05
[Gmsh] How are set up U and V vectors for elements ?
bilou
-
2020/09/24
Re: [Gmsh] GMSH units
Christophe Geuzaine
-
2020/09/24
Re: [Gmsh] ?==?utf-8?q? GMSH units
Zuheyr Alsalihi
-
2020/09/24
Re: [Gmsh] GMSH units
Max Orok
-
2020/09/24
[Gmsh] GMSH units
Zuheyr Alsalihi
-
2020/09/22
Re: [Gmsh] building of gmsh on mingw64
walter
-
2020/09/22
Re: [Gmsh] building of gmsh on mingw64
Christophe Geuzaine
-
2020/09/22
[Gmsh] building of gmsh on mingw64
walter
-
2020/09/21
[Gmsh] R: GRegion meshsize
Steffè Walter
-
2020/09/21
Re: [Gmsh] GRegion meshsize
Christophe Geuzaine
-
2020/09/21
[Gmsh] R: GRegion meshsize
Steffè Walter
-
2020/09/21
Re: [Gmsh] GRegion meshsize
Christophe Geuzaine
-
2020/09/21
[Gmsh] R: GRegion meshsize
Steffè Walter
-
2020/09/21
Re: [Gmsh] GRegion meshsize
Christophe Geuzaine
-
2020/09/20
[Gmsh] GRegion meshsize
walter steffe
-
2020/09/07
[Gmsh] Question about storing two vectors in one line of a msh file
cean wang
-
2020/09/07
Re: [Gmsh] Points not used by tetrahedrons
Christophe Geuzaine
-
2020/09/07
[Gmsh] Points not used by tetrahedrons
Tian Xia
-
2020/09/05
Re: [Gmsh] Negative Jacobians in 2nd Order Mesh
Nikhil Vaidya
-
2020/09/04
Re: [Gmsh] Negative Jacobians in 2nd Order Mesh
jeremy theler
-
2020/09/04
Re: [Gmsh] Negative Jacobians in 2nd Order Mesh
Stephen Wornom
-
2020/09/04
Re: [Gmsh] Negative Jacobians in 2nd Order Mesh
Christophe Geuzaine
-
2020/09/04
[Gmsh] Negative Jacobians in 2nd Order Mesh
Nikhil Vaidya
-
2020/09/02
Re: [Gmsh] Question about adding new solver in onelab
Christophe Geuzaine
-
2020/09/02
Re: [Gmsh] Scripting multiple views in one picture
Christophe Geuzaine
-
2020/08/27
Re: [Gmsh] Scripting multiple views in one picture
Max Orok
-
2020/08/27
[Gmsh] Scripting multiple views in one picture
Zuheyr Alsalihi
-
2020/08/26
Re: [Gmsh] ?==?utf-8?q? ?==?utf-8?q? ?= Step model view export as png from command line/scrip
Zuheyr Alsalihi
-
2020/08/26
Re: [Gmsh] Question about adding new solver in onelab
cean wang
-
2020/08/26
Re: [Gmsh] ?= Step model view export as png from command line/scrip
Jeremy Theler
-
2020/08/26
Re: [Gmsh] ?==?utf-8?q? ?==?utf-8?q? ?= Step model view export as png from command line/scrip
Zuheyr Alsalihi
-
2020/08/26
Re: [Gmsh] ?==?utf-8?q? ?==?utf-8?q? ?= Step model view export as png from command line/scrip
Zuheyr Alsalihi
-
2020/08/26
Re: [Gmsh] ?==?utf-8?q? Step model view export as png from command line/script
Jeremy Theler
-
2020/08/26
Re: [Gmsh] ?==?utf-8?q? Step model view export as png from command line/script
Zuheyr Alsalihi
-
2020/08/25
Re: [Gmsh] Step model view export as png from command line/script
SAHA, SUDIPTA
-
2020/08/25
[Gmsh] Step model view export as png from command line/script
Zuheyr Alsalihi
-
2020/08/25
Re: [Gmsh] Question about adding new solver in onelab
Cean Wang
-
2020/08/25
Re: [Gmsh] Does BooleanUnion works on surfaces?
Marco Antolovic
-
2020/08/25
Re: [Gmsh] Question about adding new solver in onelab
Max Orok
-
2020/08/24
Re: [Gmsh] Question about adding new solver in onelab
cean wang
-
2020/08/24
Re: [Gmsh] Questions about parallelization using python API
Christophe Geuzaine
-
2020/08/24
Re: [Gmsh] Periodic Surface Error: Different number of points for periodic correspondance between surfaces.
Christophe Geuzaine
-
2020/08/24
Re: [Gmsh] question
Christophe Geuzaine
-
2020/08/24
Re: [Gmsh] joining arrow tips
Christophe Geuzaine
-
2020/08/24
Re: [Gmsh] Question about adding new solver in onelab
Christophe Geuzaine
-
2020/08/24
Re: [Gmsh] $NodeData in msh file ver 4.1
Christophe Geuzaine
-
2020/08/24
Re: [Gmsh] Does BooleanUnion works on surfaces?
Christophe Geuzaine
-
2020/08/23
[Gmsh] Does BooleanUnion works on surfaces?
Marco Antolovic
-
2020/08/22
[Gmsh] $NodeData in msh file ver 4.1
cean wang
-
2020/08/20
[Gmsh] Question about adding new solver in onelab
cean wang
-
2020/08/17
Re: [Gmsh] Coherence 'could not find extruded vertex' error
Bart Deschoolmeester
-
2020/08/17
Re: [Gmsh] Coherence 'could not find extruded vertex' error
Bart Deschoolmeester
-
2020/08/17
Re: [Gmsh] integration, spikes
Christophe Geuzaine
-
2020/08/17
Re: [Gmsh] Comparison of different meshes
Christophe Geuzaine
-
2020/08/17
Re: [Gmsh] 2D Mesh (P2) has some reverse ordering, negative determinants
Christophe Geuzaine
-
2020/08/17
Re: [Gmsh] Coherence 'could not find extruded vertex' error
Christophe Geuzaine
-
2020/08/17
Re: [Gmsh] Coherence 'could not find extruded vertex' error
Jeremy Theler
-
2020/08/17
[Gmsh] Coherence 'could not find extruded vertex' error
Bart Deschoolmeester
-
2020/08/15
Re: [Gmsh] Gaps and overlaps when using extrude command
jeremy theler
-
2020/08/15
[Gmsh] Mesh generation error because of rotational extrusion?
Bart Deschoolmeester
-
2020/08/15
Re: [Gmsh] Gaps and overlaps when using extrude command
Bart Deschoolmeester
-
2020/08/15
[Gmsh] 2D Mesh (P2) has some reverse ordering, negative determinants
Marc
-
2020/08/14
Re: [Gmsh] Comparison of different meshes
Max Orok
-
2020/08/14
Re: [Gmsh] Gaps and overlaps when using extrude command
Bart Deschoolmeester
-
2020/08/14
Re: [Gmsh] Gaps and overlaps when using extrude command
Jeremy Theler
-
2020/08/14
Re: [Gmsh] Gaps and overlaps when using extrude command
Jeremy Theler
-
2020/08/14
[Gmsh] Gaps and overlaps when using extrude command
Bart Deschoolmeester
-
2020/08/09
[Gmsh] Generate a CFD mesh
李昊
-
2020/08/05
[Gmsh] integration, spikes
t . eschner
-
2020/08/03
Re: [Gmsh] Problem of Conformal Meshing at Volume boundaries
SAHA, SUDIPTA
-
2020/08/03
[Gmsh] Problem of Conformal Meshing at Volume boundaries
Patrick Tsui
-
2020/07/30
Re: [Gmsh] Does OCC fillet splines?
Jeremy Theler
-
2020/07/29
Re: [Gmsh] Does OCC fillet splines?
Kadry Abdelmeguid Karim Hesham Ahmed
-
2020/07/29
Re: [Gmsh] Does OCC fillet splines?
Max Orok
-
2020/07/29
[Gmsh] Does OCC fillet splines?
Kadry Abdelmeguid Karim Hesham Ahmed
-
2020/07/27
[Gmsh] How to avoid creating defaultFaces in gmsh to OpenFoam conversion?
SAHA, SUDIPTA
-
2020/07/24
Re: [Gmsh] Small element size factor does not work
SAHA, SUDIPTA
-
2020/07/24
Re: [Gmsh] Small element size factor does not work
SAHA, SUDIPTA
-
2020/07/24
[Gmsh] R: Small element size factor does not work
Vicini Alessandro
-
2020/07/24
Re: [Gmsh] Small element size factor does not work
Jeremy Theler
-
2020/07/23
[Gmsh] joining arrow tips
mepl
-
2020/07/22
[Gmsh] Periodic Surface Error: Different number of points for periodic correspondance between surfaces.
lucia.cobian
-
2020/07/20
Re: [Gmsh] question
Jean-François Remacle
-
2020/07/19
[Gmsh] Questions about parallelization using python API
Kadry Abdelmeguid Karim Hesham Ahmed
-
2020/07/18
[Gmsh] question
George Bourantas
-
2020/07/17
Re: [Gmsh] Point In Volume Python API
Miroslav Kuchta
-
2020/07/17
Re: [Gmsh] Point In Volume Python API
Christophe Geuzaine
-
2020/07/17
[Gmsh] Point In Volume Python API
Miroslav Kuchta
-
2020/07/08
Re: [Gmsh] Getting lines' nodes
Christophe Geuzaine
-
2020/07/08
[Gmsh] Getting lines' nodes
Bojan Niceno
-
2020/07/08
Re: [Gmsh] Points seem to move on transfinite surface after the recombination
Bojan Niceno
-
2020/07/08
Re: [Gmsh] Not grasping something correctly.
Christophe Geuzaine
-
2020/07/08
Re: [Gmsh] Unable to select surfaces using GUI
Christophe Geuzaine
-
2020/07/08
Re: [Gmsh] Points seem to move on transfinite surface after the recombination
Christophe Geuzaine
-
2020/07/06
[Gmsh] Unable to select surfaces using GUI
A Chaube
-
2020/07/05
[Gmsh] Not grasping something correctly.
Keith Sloan
-
2020/07/03
Re: [Gmsh] There was eventually a crash report
Christophe Geuzaine
-
2020/07/03
[Gmsh] There was eventually a crash report
Keith Sloan
-
2020/07/03
Re: [Gmsh] Create gmsh 2D.
Christophe Geuzaine
-
2020/07/03
Re: [Gmsh] 3D Volume from 2D Mesh via python program
Christophe Geuzaine
-
2020/07/03
[Gmsh] 3D Volume from 2D Mesh via python program
Keith Sloan
-
2020/07/03
[Gmsh] Create gmsh 2D.
Keith Sloan
-
2020/07/03
Re: [Gmsh] Error codes.
Max Orok
-
2020/07/03
Re: [Gmsh] Error codes.
Christophe Geuzaine