Good morning,
Well I figured out by using the extrusion tool.
The problem is there is a superposition of my boundary layers and the rest of
the mesh.
Is it possible to make beginning the unstructured grids at the end of the
boundary layers ?
I simplified my .geo file to only work on the boundary layers generations.
I saw that on an other conversation :
// remove the volume
//Delete { Volume{1}; }
//extrude the boundary of the foil inwards by 0.05, with 5 layers of elements
Extrude { Surface{-232, -228}; Layers{5, 0.01}; Recombine; }
// NOTE : Create Boundaries outside the airfoil
// create the inner volume
//Surface Loop(159) = {232, 255, 242, 246, 250, 254};
//Volume(160) = {159};
I don’t understand the goal of removing the volume and adding and new one then.
And how are chosen the surfaces which are in the Surface Loop?
Please note that I can’t create multiple box (one around the foil to create
structured grids, one at the trailing edge and one outside) because I am then
using other profiles which do not like that kind of meshing.
Thank you for you help and Thank you for this amazing tool which is GMSH.
Best regards,
——— My Geo File ———
//Define Foil Coordinates (160pts)
Point(1) = { 1.000000, 0.001260, 0.0000000, 0.002};
Point(2) = { 0.993720, 0.002140, 0.0000000, 0.002};
Point(3) = { 0.982780, 0.003650, 0.0000000, 0.002};
Point(4) = { 0.969990, 0.005390, 0.0000000, 0.002};
Point(5) = { 0.955670, 0.007320, 0.0000000, 0.002};
Point(6) = { 0.940260, 0.009340, 0.0000000, 0.002};
Point(7) = { 0.924220, 0.011420, 0.0000000, 0.002};
Point(8) = { 0.907840, 0.013500, 0.0000000, 0.002};
Point(9) = { 0.891280, 0.015560, 0.0000000, 0.002};
Point(10) = { 0.874620, 0.017590, 0.0000000, 0.002};
Point(11) = { 0.857930, 0.019590, 0.0000000, 0.002};
Point(12) = { 0.841200, 0.021550, 0.0000000, 0.002};
Point(13) = { 0.824460, 0.023480, 0.0000000, 0.002};
Point(14) = { 0.807710, 0.025370, 0.0000000, 0.002};
Point(15) = { 0.790950, 0.027230, 0.0000000, 0.002};
Point(16) = { 0.774190, 0.029050, 0.0000000, 0.002};
Point(17) = { 0.757420, 0.030830, 0.0000000, 0.002};
Point(18) = { 0.740660, 0.032570, 0.0000000, 0.002};
Point(19) = { 0.723890, 0.034280, 0.0000000, 0.002};
Point(20) = { 0.707120, 0.035940, 0.0000000, 0.002};
Point(21) = { 0.690350, 0.037570, 0.0000000, 0.002};
Point(22) = { 0.673590, 0.039160, 0.0000000, 0.002};
Point(23) = { 0.656830, 0.040710, 0.0000000, 0.002};
Point(24) = { 0.640080, 0.042210, 0.0000000, 0.002};
Point(25) = { 0.623330, 0.043670, 0.0000000, 0.002};
Point(26) = { 0.606590, 0.045090, 0.0000000, 0.002};
Point(27) = { 0.589870, 0.046460, 0.0000000, 0.002};
Point(28) = { 0.573150, 0.047780, 0.0000000, 0.002};
Point(29) = { 0.556450, 0.049050, 0.0000000, 0.002};
Point(30) = { 0.539760, 0.050270, 0.0000000, 0.002};
Point(31) = { 0.523090, 0.051430, 0.0000000, 0.002};
Point(32) = { 0.506440, 0.052530, 0.0000000, 0.002};
Point(33) = { 0.489800, 0.053570, 0.0000000, 0.002};
Point(34) = { 0.473190, 0.054550, 0.0000000, 0.002};
Point(35) = { 0.456610, 0.055460, 0.0000000, 0.002};
Point(36) = { 0.440040, 0.056310, 0.0000000, 0.002};
Point(37) = { 0.423510, 0.057070, 0.0000000, 0.002};
Point(38) = { 0.407010, 0.057760, 0.0000000, 0.002};
Point(39) = { 0.390550, 0.058370, 0.0000000, 0.002};
Point(40) = { 0.374120, 0.058890, 0.0000000, 0.002};
Point(41) = { 0.357740, 0.059320, 0.0000000, 0.002};
Point(42) = { 0.341400, 0.059650, 0.0000000, 0.002};
Point(43) = { 0.325110, 0.059880, 0.0000000, 0.002};
Point(44) = { 0.308880, 0.060000, 0.0000000, 0.002};
Point(45) = { 0.292720, 0.060010, 0.0000000, 0.002};
Point(46) = { 0.276620, 0.059890, 0.0000000, 0.002};
Point(47) = { 0.260600, 0.059650, 0.0000000, 0.002};
Point(48) = { 0.244670, 0.059270, 0.0000000, 0.002};
Point(49) = { 0.228840, 0.058750, 0.0000000, 0.002};
Point(50) = { 0.213130, 0.058070, 0.0000000, 0.002};
Point(51) = { 0.197550, 0.057230, 0.0000000, 0.002};
Point(52) = { 0.182140, 0.056220, 0.0000000, 0.002};
Point(53) = { 0.166930, 0.055030, 0.0000000, 0.002};
Point(54) = { 0.151960, 0.053650, 0.0000000, 0.002};
Point(55) = { 0.137300, 0.052070, 0.0000000, 0.002};
Point(56) = { 0.123030, 0.050290, 0.0000000, 0.002};
Point(57) = { 0.109290, 0.048320, 0.0000000, 0.002};
Point(58) = { 0.096220, 0.046180, 0.0000000, 0.002};
Point(59) = { 0.083990, 0.043890, 0.0000000, 0.002};
Point(60) = { 0.072780, 0.041500, 0.0000000, 0.002};
Point(61) = { 0.062710, 0.039080, 0.0000000, 0.002};
Point(62) = { 0.053800, 0.036670, 0.0000000, 0.002};
Point(63) = { 0.046030, 0.034310, 0.0000000, 0.002};
Point(64) = { 0.039290, 0.032030, 0.0000000, 0.002};
Point(65) = { 0.033460, 0.029830, 0.0000000, 0.002};
Point(66) = { 0.028400, 0.027710, 0.0000000, 0.002};
Point(67) = { 0.023990, 0.025660, 0.0000000, 0.002};
Point(68) = { 0.020130, 0.023670, 0.0000000, 0.002};
Point(69) = { 0.016740, 0.021730, 0.0000000, 0.002};
Point(70) = { 0.013760, 0.019820, 0.0000000, 0.002};
Point(71) = { 0.011140, 0.017930, 0.0000000, 0.002};
Point(72) = { 0.008830, 0.016060, 0.0000000, 0.002};
Point(73) = { 0.006820, 0.014190, 0.0000000, 0.002};
Point(74) = { 0.005080, 0.012310, 0.0000000, 0.002};
Point(75) = { 0.003600, 0.010410, 0.0000000, 0.002};
Point(76) = { 0.002380, 0.008510, 0.0000000, 0.002};
Point(77) = { 0.001410, 0.006590, 0.0000000, 0.002};
Point(78) = { 0.000700, 0.004670, 0.0000000, 0.002};
Point(79) = { 0.000250, 0.002770, 0.0000000, 0.002};
Point(80) = { 0.000030, 0.000910, 0.0000000, 0.002};
Point(81) = { 0.000030, -0.000910, 0.0000000, 0.002};
Point(82) = { 0.000250, -0.002770, 0.0000000, 0.002};
Point(83) = { 0.000700, -0.004670, 0.0000000, 0.002};
Point(84) = { 0.001410, -0.006590, 0.0000000, 0.002};
Point(85) = { 0.002380, -0.008510, 0.0000000, 0.002};
Point(86) = { 0.003600, -0.010410, 0.0000000, 0.002};
Point(87) = { 0.005080, -0.012310, 0.0000000, 0.002};
Point(88) = { 0.006820, -0.014190, 0.0000000, 0.002};
Point(89) = { 0.008830, -0.016060, 0.0000000, 0.002};
Point(90) = { 0.011140, -0.017930, 0.0000000, 0.002};
Point(91) = { 0.013760, -0.019820, 0.0000000, 0.002};
Point(92) = { 0.016740, -0.021730, 0.0000000, 0.002};
Point(93) = { 0.020130, -0.023670, 0.0000000, 0.002};
Point(94) = { 0.023990, -0.025660, 0.0000000, 0.002};
Point(95) = { 0.028400, -0.027710, 0.0000000, 0.002};
Point(96) = { 0.033460, -0.029830, 0.0000000, 0.002};
Point(97) = { 0.039300, -0.032030, 0.0000000, 0.002};
Point(98) = { 0.046030, -0.034310, 0.0000000, 0.002};
Point(99) = { 0.053800, -0.036670, 0.0000000, 0.002};
Point(100) = { 0.062710, -0.039080, 0.0000000, 0.002};
Point(101) = { 0.072780, -0.041500, 0.0000000, 0.002};
Point(102) = { 0.083990, -0.043890, 0.0000000, 0.002};
Point(103) = { 0.096220, -0.046180, 0.0000000, 0.002};
Point(104) = { 0.109290, -0.048320, 0.0000000, 0.002};
Point(105) = { 0.123030, -0.050290, 0.0000000, 0.002};
Point(106) = { 0.137300, -0.052070, 0.0000000, 0.002};
Point(107) = { 0.151960, -0.053650, 0.0000000, 0.002};
Point(108) = { 0.166930, -0.055030, 0.0000000, 0.002};
Point(109) = { 0.182140, -0.056220, 0.0000000, 0.002};
Point(110) = { 0.197550, -0.057230, 0.0000000, 0.002};
Point(111) = { 0.213130, -0.058070, 0.0000000, 0.002};
Point(112) = { 0.228840, -0.058750, 0.0000000, 0.002};
Point(113) = { 0.244670, -0.059270, 0.0000000, 0.002};
Point(114) = { 0.260600, -0.059650, 0.0000000, 0.002};
Point(115) = { 0.276620, -0.059890, 0.0000000, 0.002};
Point(116) = { 0.292720, -0.060010, 0.0000000, 0.002};
Point(117) = { 0.308880, -0.060000, 0.0000000, 0.002};
Point(118) = { 0.325110, -0.059880, 0.0000000, 0.002};
Point(119) = { 0.341400, -0.059650, 0.0000000, 0.002};
Point(120) = { 0.357740, -0.059320, 0.0000000, 0.002};
Point(121) = { 0.374120, -0.058890, 0.0000000, 0.002};
Point(122) = { 0.390550, -0.058370, 0.0000000, 0.002};
Point(123) = { 0.407010, -0.057760, 0.0000000, 0.002};
Point(124) = { 0.423510, -0.057070, 0.0000000, 0.002};
Point(125) = { 0.440040, -0.056310, 0.0000000, 0.002};
Point(126) = { 0.456610, -0.055460, 0.0000000, 0.002};
Point(127) = { 0.473190, -0.054550, 0.0000000, 0.002};
Point(128) = { 0.489800, -0.053570, 0.0000000, 0.002};
Point(129) = { 0.506440, -0.052530, 0.0000000, 0.002};
Point(130) = { 0.523090, -0.051430, 0.0000000, 0.002};
Point(131) = { 0.539760, -0.050270, 0.0000000, 0.002};
Point(132) = { 0.556450, -0.049050, 0.0000000, 0.002};
Point(133) = { 0.573150, -0.047780, 0.0000000, 0.002};
Point(134) = { 0.589870, -0.046460, 0.0000000, 0.002};
Point(135) = { 0.606590, -0.045090, 0.0000000, 0.002};
Point(136) = { 0.623330, -0.043670, 0.0000000, 0.002};
Point(137) = { 0.640080, -0.042210, 0.0000000, 0.002};
Point(138) = { 0.656830, -0.040710, 0.0000000, 0.002};
Point(139) = { 0.673590, -0.039160, 0.0000000, 0.002};
Point(140) = { 0.690350, -0.037570, 0.0000000, 0.002};
Point(141) = { 0.707120, -0.035940, 0.0000000, 0.002};
Point(142) = { 0.723890, -0.034280, 0.0000000, 0.002};
Point(143) = { 0.740660, -0.032570, 0.0000000, 0.002};
Point(144) = { 0.757420, -0.030830, 0.0000000, 0.002};
Point(145) = { 0.774190, -0.029050, 0.0000000, 0.002};
Point(146) = { 0.790950, -0.027230, 0.0000000, 0.002};
Point(147) = { 0.807710, -0.025370, 0.0000000, 0.002};
Point(148) = { 0.824460, -0.023480, 0.0000000, 0.002};
Point(149) = { 0.841200, -0.021550, 0.0000000, 0.002};
Point(150) = { 0.857930, -0.019590, 0.0000000, 0.002};
Point(151) = { 0.874620, -0.017590, 0.0000000, 0.002};
Point(152) = { 0.891280, -0.015560, 0.0000000, 0.002};
Point(153) = { 0.907840, -0.013500, 0.0000000, 0.002};
Point(154) = { 0.924220, -0.011420, 0.0000000, 0.002};
Point(155) = { 0.940260, -0.009340, 0.0000000, 0.002};
Point(156) = { 0.955670, -0.007320, 0.0000000, 0.002};
Point(157) = { 0.969990, -0.005390, 0.0000000, 0.002};
Point(158) = { 0.982780, -0.003650, 0.0000000, 0.002};
Point(159) = { 0.993720, -0.002140, 0.0000000, 0.002};
Point(160) = { 1.000000, -0.001260, 0.0000000, 0.002};
//Define bounding box corners
Point(1001) = { 6.000000, 3.000000, 0.0000000, 1.0};
Point(1002) = { 6.000000, -3.000000, 0.0000000, 1.0};
Point(1003) = { -3.000000, -3.000000, 0.0000000, 1.0};
Point(1004) = { -3.000000, 3.000000, 0.0000000, 1.0};
//Define bounding box edges
Line(1) = {1001, 1002};
Line(2) = {1002, 1003};
Line(3) = {1003, 1004};
Line(4) = {1004, 1001};
//Define bounding box outer boundary
Line Loop(101) = {1, 2, 3, 4};
//Define foil spline and trailing edge
Spline(5) = {1:160};
Line(6) = {160, 1};
//Define foil boundary
Line Loop(102) = {5, 6};
//Define unstructured far field mesh zone
Plane Surface(201) = {101, 102};
//Extrude unstructured far field mesh
Extrude {0, 0, 1} {
Surface {201};
Layers{1};
Recombine;
}
// remove the volume
//Delete { Volume{1}; }
//extrude the boundary of the foil inwards by 0.05, with 5 layers of elements
Extrude { Surface{-232, -228}; Layers{5, 0.01}; Recombine; }
// NOTE : Create Boundaries outside the airfoil
// create the inner volume
//Surface Loop(159) = {232, 255, 242, 246, 250, 254};
//Volume(160) = {159};
//Define physical surfaces - numeric designations from GUI
Physical Surface("back") = {201};
Physical Surface("front") = {233};
Physical Surface("top") = {224};
Physical Surface("bottom") = {216};
Physical Surface("inlet") = {220};
Physical Surface("outlet") = {212};
Physical Surface("foil") = {228, 232};
//Define physical volumes - numeric designations from GUI
Physical Volume("internal") = {1};
>
>
_______________________________________________
gmsh mailing list
[email protected]
http://onelab.info/mailman/listinfo/gmsh
