Dear Michael, Comment-out the transfinite volume command:
//Transfinite Volume "*"; Without recombination (i.e. when generating tets), transfinite volume definitions need to be specified by hand (i.e. not with "*") if you want to ensure conformity between surface and volume meshes. Christophe > On 7 Dec 2016, at 12:24, Michael Groß <[email protected]> wrote: > > Dear Christophe, > > I need your help with an error in gmsh. > > Using 10-node tetraeder elements for discretizing a cook-like cube (see > attached file), I get two nodes 36 and 37, which should not exist. These > nodes arise not in the volume elements, but in the surface elements, and > therefore in the node vector and the node sets. > > Do you have the same error? I work with the linux versions. > > With kind regards, > > -- > Prof. Michael Groß > Professur Technische Mechanik/Dynamik > Fakultät für Maschinenbau > > Technische Universität Chemnitz > Reichenhainer Straße 70 | R. W239 > 09126 Chemnitz > Germany > > www.tu-chemnitz.de > <i10cubeskew12.inp><i10cubeskew12.msh><i10cubeskew12.geo> -- Prof. Christophe Geuzaine University of Liege, Electrical Engineering and Computer Science http://www.montefiore.ulg.ac.be/~geuzaine Free software: http://gmsh.info | http://getdp.info | http://onelab.info _______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
