On 31/01/17 18:38, Rémi COQUARD wrote:
Dear,
I'm a recent user of you Gmsh software.
I use it for the meshing of complex volumes that can actually be obtained by
merging simpler individual particles (for example spheres and
circualr cylinders).
Therefore, I wonder if your software allows to create a geometry (volume) by merging (or
"soldering") several geometries previously created by
classical commands (such as extrusion ....) ?
http://gmsh.info/doc/texinfo/gmsh.html#and-what-Gmsh-is-not-so-good-at
The final objective is to mesh the complex volume in 3-D elements
Thank you by advance for your attention and assistance
Rémi Coquard
Research Engineer
Tél : 04 37 48 84 37
Fax : 04 37 48 84 05
Site : *_www.ec2-modelisation.fr <http://www.ec2-ms.fr>_*
66, bd Niels Bohr 69 603 Villeurbanne Cedex
_______________________________________________
gmsh mailing list
[email protected]
http://onelab.info/mailman/listinfo/gmsh
_______________________________________________
gmsh mailing list
[email protected]
http://onelab.info/mailman/listinfo/gmsh
