> On 1 Mar 2017, at 12:54, Benedikt Oswald <benedikt.oswald@lspr.swiss> wrote: > > Dear gmsh > > I have the problem that I need to create a volume mesh of two blocks > whose surface touch each other > > partially, i.e. the intersection of the surfaces of these two blocks is > not empty. > > > Now, using the Opencascade factory, what is the right way to ensure that > the tetrahedral mesh > > is generated so that tetrahedra on opposite sides of the intersecting > surface match ? >
BooleanFragments : cf. demos/boolean/compsolid.geo > A short hint or example is highly appreciated. > > Greetings & thanks, Benedikt > > > > -- > ---------------------------------------------------------------------------------------------------------------------- > Dr. sc. techn. Benedikt Oswald - first engineer - LSPR AG - phone +41 43 366 > 90 74 > Grubenstrasse 9, CH-8045 Zürich, benedikt.oswald@lspr.swiss > ---------------------------------------------------------------------------------------------------------------------- > > > _______________________________________________ > gmsh mailing list > gmsh@onelab.info > http://onelab.info/mailman/listinfo/gmsh -- Prof. Christophe Geuzaine University of Liege, Electrical Engineering and Computer Science http://www.montefiore.ulg.ac.be/~geuzaine Free software: http://gmsh.info | http://getdp.info | http://onelab.info _______________________________________________ gmsh mailing list gmsh@onelab.info http://onelab.info/mailman/listinfo/gmsh