Hi Daniel,
Ok, if you really need to work on the imported mesh, you should probably have a look at this archived topic: http://onelab.info/pipermail/gmsh/2017/011111.html. Two solutions have been there discussed to tackle a problem quite similar to yours. Sincerely Yours, Guillaume DILASSER Doctorant SACM / LEAS CEA - Centre de Saclay - Bât.123 - PC 319c 91191 Gif sur Yvette Cedex - France - [email protected]<mailto:[email protected]>
_______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
