Dear GMSH Team, This is to bring to your notice following observations. I am using GMSH 2.12.0 and the geo file is attached.
1. Creating surface by rotate does not accept 2*pi [rad]. It just ignores. I would advise to mention if there is any limitation on angle to be used in "extrude by rotation". 2. The surface does created by rotation seems to be a bit strange [looking at iso lines]. Please refer to the image attahed. 3. When rotation angle is specified pi [rad], one of the edges get turned upside down. You may try by changing the value pi/2 to pi in the attached geo file. Please see if there is any issue with this version! Regards, Amod -----+-----+-----+-----+-----+-----+-----+-----+-----+-----+----- *Twitter:* @AmodK78, *Web:* www.cfdyna.com *LinkedIn:* https://www.linkedin.com/in/amod-kumar-4722375
Bucket.geo
Description: Binary data
_______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
