> On 8 Jul 2017, at 01:39, Alex Lindsay <[email protected]> wrote:
>
> I have a large lattice geometry generated by for loops and extrusion. I have
> a physical volume called "fuel" composed of 841 elementary volumes; addition
> to the physical group is done automatically in the for loops. The "fuel"
> geometry is attached. I want to remove one of the elementary volumes from the
> physical volume. Through the GUI, I know its ID. With the information I have,
> can I do what I want to do?
Physical Volume(1) -= {1,2,3};
> Or other suggestions?
Add the elementary ids to a list 9selectively), and only create the physical
later.
>
> Alex
> <fuel_lattice.png>_______________________________________________
> gmsh mailing list
> [email protected]
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine
Free software: http://gmsh.info | http://getdp.info | http://onelab.info
_______________________________________________
gmsh mailing list
[email protected]
http://onelab.info/mailman/listinfo/gmsh
