Good morning, I used GMSH to make geometry and next to export it in Ansys CFX with a bdf format ( the only one that work, that last time i tried)
I use the plugin crack to define two different boundary condition for each side of the same surface. Until now, this methode work very well. But lastly i built a more complexe geometry, and the exportation in bdf format give surface divided in two pieces. I don't understand why it doesn't work for this geometry. Do i use a crack plugin badly? Can you say to me what i did wrong? You can find in this link the geometry in geo, msh and bdf format and the script for the crack plugin: https://www.dropbox.com/sh/0rn7k57ko876jjv/AACx8nt8fJe9-7HdwvY7Kft3a?dl=0 [https://cfl.dropboxstatic.com/static/images/icons128/folder_dropbox.png]<https://www.dropbox.com/sh/0rn7k57ko876jjv/AACx8nt8fJe9-7HdwvY7Kft3a?dl=0> geomgmsh<https://www.dropbox.com/sh/0rn7k57ko876jjv/AACx8nt8fJe9-7HdwvY7Kft3a?dl=0> www.dropbox.com Shared with Dropbox The surface that are divided in two, are the surface with groupphysique number : 4,7,37 and 5. And i don't understand why only these four surface are wrong, while the other are right in Ansys CFX thank you Adrien
_______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
