> On 5 Oct 2017, at 16:03, Luca Azzolin <[email protected]> wrote: > > Dear Mr./Mrs., > > I have been using gmsh to mesh this biventricle_together.stl file. The things > that I wanted to do are: > - fill the gap between the external boundary and the 2 internal boundaries > with 3D elements ( so that I will have a volume with 2 holes ); > - mesh this final volume; > but I had some problems in trying to do that. > I have imported the file as .stl but now how can I create that volume with 2 > holes? >
Your volume is not closed. Gmsh currently does not have tools to fix this, as it expects a topologically correct geometry as input. > Thank you so much. > > Best regards, > > Luca Azzolin > <biventricle_together_new.stl>_______________________________________________ > gmsh mailing list > [email protected] > http://onelab.info/mailman/listinfo/gmsh -- Prof. Christophe Geuzaine University of Liege, Electrical Engineering and Computer Science http://www.montefiore.ulg.ac.be/~geuzaine Free software: http://gmsh.info | http://getdp.info | http://onelab.info _______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
