Hello Matthias, Both of those commands are under the Geometry -> Elementary entities menu.
[image: image.png] While the GUI is very nice, I personally prefer using a geo file and opening it in the GUI, since it is a bit more reproducible for tricky models. Sincerely, Max On Tue, Sep 25, 2018 at 5:28 AM Zenker, Dr. Matthias < [email protected]> wrote: > Hi, > > > > I have a simple question and apologize if this has been answered before – > I didn’t find the answer in the archive or the gmsh manual. > > > > I want to do the following using the gmsh GUI: > > > > 1. Import a STEP file containing several bodies > > 2. remove duplicate entities, i.e. the duplicated interface(s) > between the bodies > > 3. make a conformal 3D mesh, i.e. adjacent bodies should be > connected so that heat can flow between them. > > > > This can be achieved with commands in a geo file, invoking the OpenCASCADE > toolbox and the coherence command. > > Can it also be done using only the GUI? More specifically, how do I invoke > the OpenCASCADE toolbox from the GUI? > > > > Thanks for helpful hints. > > > > Matthias > ------------------------------ > > Erbe Elektromedizin GmbH Firmensitz: 72072 Tuebingen Geschaeftsfuehrer: > Christian O. Erbe, Reiner Thede Registergericht: Stuttgart HRB 380137 > > _______________________________________________ > gmsh mailing list > [email protected] > http://onelab.info/mailman/listinfo/gmsh > -- Max Orok Contractor www.mevex.com
_______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
