Hi Jiang, There's currently no option to export the voronoi: Mesh.Voronoi=1 just requests the Voronoi to be displayed graphically (mostly for debugging/educational purposes). It's easy enough to compute once you have the mesh, though.
Christophe > On 26 Sep 2018, at 05:14, Jiang, Yu <[email protected]> wrote: > > Hello Gmsh developers, > > Thanks for developing the nice code for meshing. I got my 3d Delaunay > triangulation without any problem. However, when I tried to make a Voronoi > tessellation, I failed to find a way. > > As long as I read from the manual, there is a setting Mesh.Voronoi=1 which > visualizes a Voronoi diagram of current model. It did give me the results I > wanted, but I cannot have them outputted into a file. > > My question is: is there a way to output these Voronoi tessellation results? > As long as they can be shown properly, I assume the points, lines and > surfaces of Voronoi polyhedrons has already been calculated without any > problem. If there has not been a way to output these results in the current > program, can I get the name of the source file where Mesh.Voronoi option is > performed into calculation that I can make some modifications to print them > out myself? > > Thanks for your help, and look forward to hear from you. > > Sincerely, > > Yun Jiang > > _______________________________________________ > gmsh mailing list > [email protected] > http://onelab.info/mailman/listinfo/gmsh — Prof. Christophe Geuzaine University of Liege, Electrical Engineering and Computer Science http://www.montefiore.ulg.ac.be/~geuzaine Free software: http://gmsh.info | http://getdp.info | http://onelab.info _______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
