> On 14 Oct 2018, at 22:10, 浜津 良輔 <[email protected]> wrote: > > Dear Gmsh users and the gmsh team; > > We are constructing an electric device whose electric field is formed by many > of thin metallic wires stretched to form a set of planes. For calculating the > electric field around the wires, we need meshing in the volume of the device > and only on the surface of thin wires, not in the body of the wires. >
You can then just define the volume outside the wires. If the wires are very thin, Gmsh also allows you to embed curves (i.e. infinitely thin wires) directly in the 3D tet mesh. > Thank you for your kind help, > Ryo > > > > _______________________________________________ > gmsh mailing list > [email protected] > http://onelab.info/mailman/listinfo/gmsh — Prof. Christophe Geuzaine University of Liege, Electrical Engineering and Computer Science http://www.montefiore.ulg.ac.be/~geuzaine Free software: http://gmsh.info | http://getdp.info | http://onelab.info _______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
