> On 6 Dec 2018, at 10:52, Zuheyr Alsalihi <alsal...@vki.ac.be> wrote: > > Dear Prof. Geuzaine and fellow GMSH users, > > I cannot succeed creating STL model with holes in it. > If I create different volume entities for the outer body and the holes, can I > tell gmsh "ignore certain volumes" > and do not mesh them!?
If you don't define the volume corresponding to the hole, Gmsh will not mesh it... Can you share a simple example? > > Kindest regards and many thanks, > > Zuheyr Alsalihi — Prof. Christophe Geuzaine University of Liege, Electrical Engineering and Computer Science http://www.montefiore.ulg.ac.be/~geuzaine Free software: http://gmsh.info | http://getdp.info | http://onelab.info _______________________________________________ gmsh mailing list gmsh@onelab.info http://onelab.info/mailman/listinfo/gmsh