Hi Christophe, thanks! It seems strange but restarting X solved the problem. Sincerely, -- Tiago FS
On Sat, Mar 9, 2019 at 2:05 PM Christophe Geuzaine <[email protected]> wrote: > > > > On 9 Mar 2019, at 17:50, Tiago Silva <[email protected]> wrote: > > > > Hi Christophe, > > thanks for the reply. > > Yes! The official binary version presents exactly the same behavior. > > Then it's probably an OpenGL configuration issue on your machine... You > can try e.g. one of the OpenGL demos that should be bundled with the > system, e.g. glxgears. > > > Sincerely, > > -- > > Tiago FS > > > > > > On Sat, Mar 9, 2019 at 1:43 PM Christophe Geuzaine <[email protected]> > wrote: > > > > Does the official binary version from http://gmsh.info/#Download > exhibit the same issue? > > > > > On 9 Mar 2019, at 17:22, Tiago Silva <[email protected]> wrote: > > > > > > Hello to everyone, > > > After experiencing some issues with the gmsh version available in the > Ubuntu repository (18.04), I decided to follow the instructions to compile > the source files available in gitlab. > > > After cloning the project, I followed the instructions on the gmsh > website and used cmake to compile it. > > > In order to get the gmsh GUI available, in had previously installed > libflk1.3-dev. > > > However, when I run gmsh, the GUI opens with a black screen in the > graphics zone. > > > Simultaneously, the following error messages showed up in the terminal: > > > > > > " > > > XRequest.151: BadValue (integer parameter out of range for operation) > 0x0 > > > XRequest.151: BadMatch (invalid parameter attributes) 0x0 > > > XRequest.151: GLXBadDrawable 0x3a00006 > > > XRequest.151: BadValue (integer parameter out of range for operation) > 0x0 > > > XRequest.151: BadValue (integer parameter out of range for operation) > 0x0 > > > XRequest.151: GLXBadDrawable 0x3a00006 > > > " > > > > > > And every time I pass the pointer in the GUI window I get a new error > message as follows: > > > > > > " > > > XRequest.151: BadValue (integer parameter out of range for operation) > 0x0 > > > " > > > > > > I would appreciate any help with this issue. > > > Sincerely, > > > -- > > > Tiago FS > > > _______________________________________________ > > > gmsh mailing list > > > [email protected] > > > http://onelab.info/mailman/listinfo/gmsh > > > > — > > Prof. Christophe Geuzaine > > University of Liege, Electrical Engineering and Computer Science > > http://www.montefiore.ulg.ac.be/~geuzaine > > > > > > > > — > Prof. Christophe Geuzaine > University of Liege, Electrical Engineering and Computer Science > http://www.montefiore.ulg.ac.be/~geuzaine > > > >
_______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
