Thanks to reply Alessandro
But I try in two ways by it does not work corectly.
exempla
script below
//+
Line(3) = {4, 3};
//+
Line(4) = {2, 3};
//+
Curve Loop(1) = {1, 2, 4, -3};//+
Plane Surface(1) = {1};
//+
Transfinite Curve {3, 2} = 2 Using Progression 1;
//+
Transfinite Curve {1} = 2 Using Progression 1;
//+
Transfinite Curve {4} = 2 Using Progression 1;
//+
Recombine Surface {1};
//+
Transfinite Surface {1};
//+
Physical Curve("1") = {3};
//+
Physical Curve("2") = {4};
//+
Physical Curve("3") = {2};
//+
Physical Curve("4") = {1};
//+
Physical Surface("5") = {1};
++++++++++++++++++++++++++++++++++++++++
I want a mesh 3x3 but not done well.
That script only create a 2x2 mesh...
[image: image.png]
Doo you know what my mistake?
Thanks a lot!
Eduardo Serenza
Em ter, 16 de jul de 2019 às 03:48, Alessandro Vicini <
[email protected]> escreveu:
>
>
> With transfinite line you set the number of nodes, not elements. So if you
> set an odd number, you will get an even number of elements.
>
>
>
> A.
>
>
>
>
>
> *Da:* gmsh <[email protected]> *Per conto di *
> Eduardo
> *Inviato:* martedì 16 luglio 2019 03:31
> *A:* [email protected]
> *Oggetto:* [Gmsh] Gmsh - Transfinite
>
>
>
> Hy My name is Eduardo
>
>
>
> I am trying to set or put a 3 element on the edge. (odd number)
>
> but I cannot do that. All the time I only do even number.
>
>
>
> Why I can not choose odd number of element on the edge in 2d plate.
>
> I use transfinite line.
>
>
>
> Best Regards
>
>
>
> Eduardo S.
>
_______________________________________________
gmsh mailing list
[email protected]
http://onelab.info/mailman/listinfo/gmsh
