Thank you, works perfectly.
Zoltan
On 29/02/2020 09:23, Christophe Geuzaine wrote:
On 28 Feb 2020, at 18:30, Zoltan <[email protected]> wrote:
Greetings,
I want to solve a plane stress problem in linear elasticity on a rectangular
domain. To do this, I followed the instruction in the header of the
Interactive_Elasticity.pro file.
First, I created the domain and the default triangular mesh on it. Then I defined
two physical groups, one for the left and one for the right side of the rectangle.
After that, I clicked on File -> Merge and selected the
Interactive_Elasticity.pro file. Here comes the problem. The instruction writes:
“You will be prompted to setup your material, sources and the boundary conditions
for each physical group, interactively.”. You can see from the attached screenshot
(using the latest Linux x64 binary of ONELAB) that only the boundary conditions
appeared.
You just need to define a physical group for the surface as well.
Christophe
The problem can still be solved but the displacement and stress values are
zeros, as you see from the opened result text files.
Questions:
• How can I set the material parameters and ?
• Why is my solution a zero vector?
• How can I visualize any component of the displacement vector and the
stress tensor?
Thank you
<Screenshot from 2020-02-28
14-20-34.png>_______________________________________________
gmsh mailing list
[email protected]
http://onelab.info/mailman/listinfo/gmsh
—
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine
_______________________________________________
gmsh mailing list
[email protected]
http://onelab.info/mailman/listinfo/gmsh
