Hi Karim, If possible, you should submit the geo script of your Gmsh session. It will help to see what you've tried already.
Max On Wed, Jul 29, 2020 at 1:26 PM Kadry Abdelmeguid Karim Hesham Ahmed < karim.kadryabdelmeg...@epfl.ch> wrote: > Hello Gmsh community, > > I am learning how to fillet a volume and I'm running into problems when I > use closed splines as faces > > > I draw a simple closed spline, define a plane surface, extrude it a small > distance. I then try to fillet the face curve belonging to the extruded > volume and an error appears which says "could not compute fillet". > > > I also tried various radii to check but it did not work either! > > Is the kernel able to fillet spline based edges? I am able to fillet the > same extruded volume but with circles just fine. Tutorial 19 only deals > with circles as the face being extruded and not splines (only as > guidewires) so that's not much help. > > > I attached .brep of the volume that I'm having trouble with. > > Thanks! > > Karim > > _______________________________________________ > gmsh mailing list > gmsh@onelab.info > http://onelab.info/mailman/listinfo/gmsh > -- Max Orok Contractor www.mevex.com
_______________________________________________ gmsh mailing list gmsh@onelab.info http://onelab.info/mailman/listinfo/gmsh
